Loading ...
Loading ...
Loading ...
6
1. Power-on the ROCKBAR by connecting it to an AC power source and pressing the
Power/Standby button.
2. Plug in your USB ash drive. The unit will automatically read the les and begin playing music.
3. You can control playback from the ROCKBAR (volume) or the remote control (volume,
tracks, play/pause, stop).
4. To exit USB mode you can remove your USB ash drive or press the Power/Standby
button on the side of the ROCKBAR to select another mode. To return to USB mode
plug in a USB ash drive or press the Power/Stand-by button until the LCD display
shows the letters "US". You can also press the INPUT button on the remote control to
exit from or return to USB mode.
Please note: the ROCKBAR supports USB drives up to 32Gb and the MP3 le format.
The USB port does not support charging.
2. Use a digital optical audio cable to connect the ROCKBAR to the sound source. You
will need to adjust the device’s volume and the ROCKBAR’s volume independently.
3. Set your TV's sound output to external speakers.
Please note: If you are having issues with sound output, go into your TV's audio settings
and make sure to deactivate Dolby Pro-Logic, Dolby ATMOS, etc. and select PCM format.
The ROCKBAR can be connected to your TV or receiver via an ARC enabled HDMI port.
ARC stands for "Audio Return Channel" and has been available on most TV's, receivers,
and soundbars since the HDMI 1.4 standard was introduced in 2009. The ARC protocol
offers two-way communication between devices over a single HDMI connection. Simply
put, this means that you can use the HDMI ARC port (if available) as an input and an au-
dio output. Check your specic device's manual to see if it features an HDMI ARC port.
1. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button on the side of the ROCKBAR and continue to press it until the LCD
display shows the letters "Hd". You can also press the INPUT button on the remote
control to reach HDMI mode.
2. Connect a standard HDMI cable to your sound bar and connect the other end to your
TV's HDMI ARC port. Most TV's feature ARC output over only one HDMI port. This
port should be labeled as HDMI ARC. If the HDMI ports aren't clearly labeled, you
can check the TV manual, which should indicate which HDMI port to use and if the
ARC feature needs to be manually activated.
Please note: the ROCKBAR must be plugged into an ARC enabled HDMI port. It will not
work with a standard HDMI port. Check your specic device's manual to see if it features
an HDMI ARC port.
3. Set your TV's sound output to external speakers.
Please note: If you are having issues with sound output, go into your TV's audio settings
and make sure to deactivate Dolby Pro-Logic, Dolby ATMOS, etc. and select PCM format.
USB
HDMI (ARC)
AUX
Use the 3.5mm AUX jack to connect computers or any other external sound source with
a 3.5mm output.
Loading ...
Loading ...
Loading ...