Loading ...
Loading ...
Loading ...
Mounting the subwoofer
Find a suitable location in the vehicle in which to mount the
amplifier.
Make sure there is sufficient air circulation around the intended
mounting location. Position the subwoofer enclosure where you
wish to install it. Make some small marks to identify the position
and remove the unit.
We have provided kits for two different installation methods, as
follows:
Using self-adhesive tape:
1. Thoroughly clean the area where you plan to attach the
subwoofer.
2. Attach the supplied double-sided adhesive tape to the unit.
Carefully place the unit in the predeterrmined area and press
down firmly to secure it in place.
Using mounting legs:
1. Thoroughly clean the area where you plan to attach the subwoofer.
2. Using the (8) machine screws provided, attach the legs to the
ends of the enclosure as shown in the diagram at the top right.
3. Using the (4) self-tapping screws provided, attach each of the
brackets to the surface below. Of course, before you drill or cut
any holes, investigate your car's layout very carefully. Take special
care when you work near the gas tank, fuel lines, hydraulic lines
and electrical wiring.
Attaching the mounting legs to
the ends of the enclosure.
Attaching the mounting brackets to
the mounting surface.
Loading ...
Loading ...
Loading ...