Hikvision DS-2TD2117-10/PI User Manual

Loading ...

Chapter 8 Event and Alarm

This part introduces the conguraon of events. The device takes certain response to triggered

alarm. Certain events may not be supported by certain device models.

8.1 Set Moon Detecon

It helps to detect the moving objects in the detecon region and trigger the linkage acons.

Steps

Go to Conguraon → Event → Basic Event → Moon Detecon .

Check Enable

Moon Detecon.

Oponal: Highlight to display the moving object in the image in green.

1) Check Enable Dynamic Analysis for Moon.

2) Go to

Conguraon → Local .

3) Set Rules to Enable.

Select

Conguraon Mode, and set rule region and rule parameters.

For the

informaon about normal mode, see Normal Mode .

For the

informaon about expert mode, see Expert Mode .

Set the arming schedule and linkage methods. For the

informaon about arming schedule

sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage

Method Sengs .

Click Save.

8.1.1 Normal Mode

You can set moon detecon parameters according to the device default parameters.

Steps

Select normal mode in Conguraon.

Set the sensivity of normal mode. The higher the value of sensivity is, the more sensive the

moon detecon is. If the sensivity is set to 0, moon detecon and dynamic analysis do not

take eect.

Set Detecon Target. Human and vehicle are available. If the detecon target is not selected, all

the detected targets will be reported, including the human and vehicle.

Click Draw Area. Click and drag the mouse on the live video, and then release the mouse to

nish drawing one area.

Stop Drawing

Stop drawing one area.

Clear All Clear all the areas.

Oponal: You can set the parameters of mulple areas by repeang the above steps.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-10/PI Thermal Network Bullet Camera