Hikvision DS-2TD2117-10/PI User Manual

Loading ...

Chapter 6 Video Recording and Picture Capture

This part introduces the operaons of capturing video clips and snapshots, playback, and

downloading captured

les.

6.1 Storage Sengs

This part introduces the conguraon of several common storage paths.

6.1.1 Set Memory Card

If you choose to store the les to memory card, make sure you insert and format the memory card

in advance.

Before You Start

Insert the memory card to the camera. For detailed installaon, refer to Quick Start Guide of the

camera.

Steps

Go to storage management

seng page: Conguraon → Storage → Storage Management →

HDD Management .

Select the memory card, and click Format to start

inializing the memory card.

The Status of memory card turns to Normal from Uninialized, which means the memory card

can be used normally.

Oponal: Dene the Quota of the memory card. Input the quota percentage for dierent

contents according to your need.

Oponal: Check to enable POS Informaon Storage, then the device will record the POS

informaon of reect light lter and forkli lter.

Note

The funcon is supported when your memory card capacity is 32 GB or above. Formang the

memory card manually is required to reserve 16 GB for POS informaon.

Click Save.

6.1.2 Set NAS

Take network server as network disk to store the record les, captured images, etc.

Before You Start

Get the IP address of the network disk

rst.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-10/PI Thermal Network Bullet Camera