Loading ...
Loading ...
Loading ...
Steps
1. Go to System → Device Access → Device → POS .
2. Click Add to add a POS device.
Figure 6-4 Add POS Device
3. Set the POS device parameters.
POS Protocol
Universal Protocol
You can set the start line
idener, line break tag, and end line tag for the POS overlay
characters, and the case-sensive property of the characters. You can also oponally check
the
ltering idener and the XML protocol.
EPSON
The xed start and end line tag are used for EPSON protocol.
AVE
The xed start and end line tag are used for AVE protocol. Serial port and virtual serial port
connecon types are supported.
NUCLEUS
The
xed start and end line tag are used for AVE protocol. Serial port and virtual serial port
connecon types are supported. The NUCLEUS protocol must be used in the RS-232
connecon communicaon.
Connecon Mode
TCP Connecon
When using TCP connecon, the port must be set from 1 to 65535, and the port for each
POS machine must be unique.
UDP
Connecon
Network Video Recorder User Manual
23
Loading ...
Loading ...
Loading ...