Loading ...
Loading ...
Loading ...
Steps
1. Go to System → System Sengs → Network → Network → Other .
2. Set Mulcast parameters.
Note
●
When adding device through network video security client, mulcast group IP address should
be the same as the device mulcast IP address.
●
For IPv4, it covers Class-D IP ranging from 224.0.0.0 to 239.255.255.255 and it is
recommended to use an IP address ranging from 239.252.0.0 to 239.255.255.255. When
adding a device to the CMS soware, the mulcast address must be the same as that of the
device.
3. Click Save.
4.2
Plaorm Access Sengs
4.2.1 Congure Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
video recorder, which enables you to get a convenient remote access to the video security system.
Steps
1. Go to System → System
Sengs → Network → Hik-Connect.
Figure 4-4 Hik-Connect
2. Turn on Enable, and the service terms will pop up.
3. Accept the service terms.
4. Click
to set vericaon code.
5. Oponal: Enable Stream Encrypon, Sub-Stream Self-Adapve Bitrate, Time Sync, or edit
server IP address.
Stream
Encrypon
It requires to enter vericaon code in remote access and live view aer this funcon is
enabled.
Network Video Recorder User Manual
9
Loading ...
Loading ...
Loading ...