Loading ...
Loading ...
Loading ...
5 6
QUICK START GUIDE
• Please read the corresponding content on the instruction manual for detailed
operating method.
Connecting to Power and Drain
• T
• The connection of the drain pipe: Put end of the drain into a sink or bucket.
• Please make sure drain hose is positioned in the proper space (I.E sink, bucket, etc) to
avoid leakage
Adding Water To Dishwasher Tank
• Before adding water, you need to press power button to turn on the dishwasher.
• There are two ways to add water into the tank
1. Connect inlet hose to the tap (sink house included for hookup)
2. Open the cap and add water into the dishwasher tank
• T
1. B
3 seconds (5L – approximately 3 pitchers)
2. After Starting – If there is not enough water the water icon will appear
the machine will beep for 3 seconds.
The clamp must be tightened
by a screwdriver
Fix the drain pipe
with suction cups
OR
2
1
Water Inlet
Drain Pipe
OR
33
Rubber
1 2
The clamp must be tightened
by a screwdriver
Fix the drain pipe
with suction cups
OR
2
1
Water Inlet
Drain Pipe
OR
33
Rubber
1 2
• To Force Drain - In standby mode, you can press and hold “GLASS” button + “AIR REFRESH”
button for 3 seconds simultaneously to drain the water tank.
FDW05ASBWHA_Manual_vF.indd 5-6 5/20/19 3:08 PM
at the end of program.
Loading ...
Loading ...
Loading ...