Loading ...
Loading ...
Loading ...
Installation
English18
English
STEP 3 Connect the drain hose
• We strongly recommend connecting the drain hose
to your drainage system.
• If the drain hose connected on the dryer is too
short to reach the drainage system, use the
provided accessory hose (long drain hose).
• Use the built-in water tank only if you cannot
connect the drain hose to a drainage system.
NOTE
As a factory default, this dryer is set to use the built-in
water tank to drain condensed water.
A
B
1. Remove the drain hose from hole (A), and insert it
into part (B).
A
2. Insert one end of the accessory hose (long drain
hose) into hole (A).
3. Insert the other end (outlet) of the accessory hose
to the drainage system in one of the following
ways:
U-PJT_DRYER_SimpleUX_DC68-04397C-00 (PS)_EN.indd 18 2022/7/4 14:59:33
Loading ...
Loading ...
Loading ...