Loading ...
Loading ...
Loading ...
APY36238—UN—24JUL20
7. Remove spring locking pin (F) and washer and front draft rod (G)
from mower deck bracket (H).
8. Remove wood blocks from both sides and slide mower deck out
from under the machine.
9. When operating the machine without the mower deck, remove front
draft rod from machine and attach it to the mower deck.
SR99263,000033D-19-24JUL20
Installing Mower Deck (42 in Mower Deck)
1. Park machine safely. (See Parking Safely in Safety section.)
2. Put attachment lift lever in the transport position.
3. Slide mower under machine.
4. Put wooden blocks under each side of mower deck.
5. Put attachment lift lever in lowest position.
APY36176—UN—10JUL20
6. Fasten rear draft arm (A) and adjustable lift link (B), on each side,
with washers and spring locking pins (C).
IMPORTANT: Avoid damage! To prevent clutch damage, make
sure that front draft rod is installed correctly. Secure rod
with washer and spring locking pin on the left side of mower
deck bracket.
APY36237—UN—24JUL20
7. Install front draft rod (D) into mower deck bracket (E) in the upper
hole.
8. Secure front draft rod with washer and spring locking pin (G).
CAUTION: Avoid injury! Component is spring-assisted and
under tension. Injury can occur if spring-assisted
component is released suddenly.
APY36239—UN—24JUL20
9. Put mower drive belt on engine drive sheave (H). Make sure that
belt is routed through both belt guides (I).
10. Remove wooden blocks from both sides of mower deck.
11. Attach mower engagement drive cable.
Service Mower
37
Loading ...
Loading ...
Loading ...