Loading ...
Loading ...
Loading ...
414D/419D/424D
Users Manual
26
Indirect Measurement
The Meter can calculate distances with Pythagoras’
theorem. With this function, you can find a distance with
two auxiliary measurements, such as building height or
width measurements. It is helpful to use a tripod for a
height measurement that uses two or three
measurements.
Note
Make sure that you use the correct sequence of
measurement:
• All target points must be in a horizontal or
vertical plane.
• For the best results, turn the Meter about a
set point. An example of this is with the
endpiece fully open and the Meter on a wall.
• Make sure that the first measurement and
the measurement distance are at 90 °
angles.
• The minimum/maximum tracking is very
helpful for 90 ° angle measurements. See
page 17 for more information.
414D
To find a vertical distance with two measurements
(Pythagoras 1):
1. Push
3x. shows on the display.
2. Point the laser at the first target (1). See Figure 16.
3. Push
for the first distance (diagonal)
measurement.
4. Point the laser at the second target (2).
16
1
2
gwo13.eps
5. Make sure that the Meter is perpendicular to the wall.
6. Push for the second distance measurement.
The Meter shows the height in the summary line. The
distance of the second measurement shows in the
secondary line.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...