Loading ...
Loading ...
Loading ...
49-1000585 Rev. 4 33
8
REFRIGERATOR HANDLE INSTALLATION FOR DOOR-IN-DOOR
MODELS ONLY (CONT.)
+DQGOHDSSHDUDQFHPD\YDU\EDVHGRQPRGHO
however, the installation process is the same.
Remove any protective film from the door
or drawer fronts before installing handles (if
applicable). Do not remove the tape that
secures the inner door to the outer door until
after the handle is installed.
Remove handle from packaging and locate the
SURYLGHG´KH[NH\
Align the lever with the opening on the outer
door. Make sure the hook is pointed up.
,QVHUWWKHODWFKOHYHULQWRWKHRSHQLQJDQGSODFH
the handle over the mounting fasteners until it is
flush against the surface of the door.
Tighten both set screws in the handle end
FDSVE\WXUQLQJWKH´KH[NH\FORFNZLVHXQWLO
the handle will not hang loose or fall from its
PRXQWLQJ'RQRWIXOO\WLJKWHQ\HW
IMPORTANT: Hold the handle firmly against the
door, make sure there are no gaps between the
handle end caps and the door, and fully tighten
the set screws.
To remove the handles, reverse the installation
process.
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
A
B
C
'
E
)
INSTALLATION INSTRUCTIONS
Latch Lever with
Hook pointed up
'RRULQ
'RRU
Latch
Loading ...
Loading ...
Loading ...