Loading ...
Loading ...
Loading ...
9011 Dual-Well Calibrator
User’s Guide
42
Command Description
Command
Format
†
Command
Example
†
Returned
Returned
Example
Acceptable
Values
Set ALPHA calibration parameter
to
n
al[pha]=n al=0.0038433 0.0032 to
0.0042
Read DELTA calibration parameter de[lta] de de: 9.99999 de: 1.46126
Set DELTA calibration parameter
to
n
de[lta]=
n
de=1.45 1.0 to 1.9
Read BETA calibration parameter
(cold side only)
be[ta] be be: 9.999 be: 0.342
Set BETA calibration parameter to
n
(cold side only)
be[ta]=
n
be=0.342 –25.0 to 25.0
Miscellaneous (not on menus)
Read firmware version number *ver[sion] *ver ver.9999,9.99 ver.9011,1.11
Read structure of all commands h[elp] h list of commands
Read all parameters all all list of parameters
and their values
Legend: [] Optional Command data
/ Alternate characters or data
{} Returns either information
n Numeric data supplied by user—may be entered in decimal or exponential notation
9 Numeric data returned to user
x Character data returned to user
Note: When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by
a carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
†
Note: Commands that are preceded by a “C:” or an “H:” access the cold or hot side respectively. If the “C:” or
“H:” are not used, the command accesses the cold side.
Controller Communications Commands continued
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...