1
2 Remove cooking grids from grill
3
4
a. Check to see if the igniter is centered in the hole.
Look inside the grill at the front inside panel where the burner goes through housing.
igniter?
First
If your grill still will not ignite, please check the following
Upon inspection, if you find that your igniter is off-centered, follow these steps.
Remove heat tents from grill
Align Igniter with the center of the cut-out hole
If not, Take your hand and push the valve to make the igniter centered
(You can either use a flat head screw driver to align the valve or use your hand by reaching
underneath the control panel and rotating valve to align the igniter with the center of the
hole.) DO NOT PRY ON THE WHITE CERAMIC PIECE
Gas Valve Igniter Alignment
This guide is for the RCS main burners not igniting when the valve clicks over.
Are you waiting pushing in the knob & holding for 2-3 seconds before clicking the
Check to make sure you have your main gas supply open.
Will your grill light manually with a long lighter? If so, proceed with steps below.
Step 1:
www.RCSGasGrills.com
Turn off the gas supply to the grill
Loading ...
