Loading ...
Loading ...
Loading ...
Maintenance
Install or Replace the Battery Pack 7
7-3
Install or Replace the Battery Pack
Warning
Never operate the Product with the Battery Cover removed.
Hazardous voltage exposure may occur.
To install or replace a Battery Pack:
1. Make sure the Product is off.
2. Remove all probes and/or test leads.
3. Unlock the battery cover at the rear of the Product. Turn the screw a half turn.
4. Install the battery pack.
5. Put the battery cover back on the unit.
6. Tighten the screw.
Figure 7-1 shows how to install or replace a battery pack.
1
2
hsz005.eps
Figure 7-1. Install or Replace a Battery Pack
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...