Loading ...
Loading ...
Loading ...
Introduction
37
1
2. Loosen the knob by turning it anticlockwise.
Loosen the knob
Figure 1-57
3. Attach the box to the wall with the knob pointing down and use a marker to mark 4 dots.
4. Drill 4 holes according to the marks.
5. Insert the 4 screw anchors to the holes and secure the box to the wall with 4 long screws.
6. Secure the camera to the box cover with 4 short screws, as illustrated in No. 6, Figure 1-
58.
7. Thread the Ethernet cable through the PG21 conduit connector and the wall box, as
shown in No. 7, Figure 1-58. Then connect the cable to the camera. To waterproof the
Ethernet cable, see 1.8 Waterproofing the Cable.
8. Rotate the plastic ring to secure the conduit connector to the wall box. Screw in the cap,
as shown in No. 8, Figure 1-58.
9. Screw the box cover to the wall box, as shown in No. 9, Figure 1-58.
6
Plastic Ring
Cap
9
7
8
9
7
6
Figure 1-58
Loading ...
Loading ...
Loading ...