Loading ...
Loading ...
Loading ...
- 9 -
1. Use only the original factory cable. Do not use damaged or cable of other
brands.
2. Do not leave the ba�ery aside when charging.
3. Do not overcharge the ba�ery. When the ba�ery is fully charged, unplug the
device.
4. Do not charge the ba�ery immediately a�er it has become hot.
5. Do not leave the ba�ery in the fire in considera�on of safety.
6. Do not short circuit the ba�ery. Do not leave the ba�ery together with �ny
medal parts in considera�on of safety.
7. The drone needs to take out the ba�ery when not in use and store it at 80%
to extend ba�ery life. Keep the ba�ery in a cool place to avoid exposure.
A�en�on:
Low-ba�ery warning: When the ba�ery power is low, the light of drone will
flash slowly. It needs to fly back immediately.
Note: Please fully charge the ba�ery before flying.
FLIGHT
1. Remote Control Connec�on
1). Install the aircra� ba�ery and remote control ba�ery, turn on the power
switch of the aircra�, and keep the aircra� on a horizontal plane a�er flashing.
2). Turn on the remote control power switch and push the le� joys�ck up then
down to pair with the drone.
Note: Steps need to be followed to prevent poor handling problems.
2. Calibra�on Gyroscope
A�er the drone and the remote control are connected successfully, push the
le� joys�ck to the lower le� corner and push the right joys�ck to the lower
right corner. At this �me, the indicator light will flashes rapidly and change
to a steady light. The calibra�on is completed.
Loading ...
Loading ...
Loading ...