Loading ...
Loading ...
Loading ...
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to scroll through alarm ([1] to [4],
[SNZ]) and hourly time signal ([SIG])
screens until the one you want to configure
is displayed.
Alarm number or hourly time signal
3. Press (A) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (A) toggles between on
and off.
●
Turning off all alarms will cause [ALM]
(alarm) to disappear from the display,
while disabling the hourly time signal
causes [SIG] (hourly time signal) to
disappear from the display.
Note
●
If [ALM] (alarm) is still displayed, it
means that another alarm is still turned
on. To turn off all of the alarms, repeat
steps 2 and 3 until the [ALM] (alarm)
indicator is no longer displayed.
Stopwatch
The stopwatch measures elapsed time in units
of 1/100 second up to 23 hours, 59 minutes,
59.99 seconds (24 hours).
When this maximum limit is exceeded,
elapsed time measurement returns to 0 and
timing continues from there.
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
Hours
Minutes, seconds,
1/100 seconds
2. Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
3. Press (A) to reset the measurement time
to all zeros.
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
Hours
Minutes, seconds,
1/100 seconds
2. Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
from the start of a race up to the point
when you pressed the button (split
time).
D
D
A
A
Stop
Split release
Split
Start
3. Press (A) to reset the measurement time
to all zeros.
Watch Operation Guide 3545
12
Loading ...
Loading ...
Loading ...