Loading ...
Loading ...
Loading ...
Insulation Testers
Safety Information
3
• Use Product-approved measurement category (CAT), voltage, and amperage rated accessories (probes,
test leads, and adapters) for all measurements.
• Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a
Product, probe, or accessory.
• Do not use in CAT III or CAT IV environments without the protective cap installed on test probe. The
protective cap decreases the exposed probe metal to <4 mm. This decreases the possibility of arc flash
from short circuits.
• Remove all probes, test leads, and accessories that are not necessary for the measurement.
• Keep fingers behind the finger guards on the probes.
• Measure a known voltage first to make sure that the Product operates correctly.
• Always de-energize circuits before you do resistance tests.
• Replace a blown fuse with exact replacement only for continued protection against arc flash.
• Remove the batteries if the Product is not used for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not removed, battery leakage may result.
• Replace the batteries when the low battery indicator shows to prevent incorrect measurements.
• Remove all probes, test leads, and accessories before the battery door is opened.
• Replace all batteries with fresh batteries of the same manufacturer and type to prevent battery leakage.
• Repair the Product before use if the battery leaks. Battery leakage may create a shock hazard or
damage the Product.
• The battery door must be closed and locked before you operate the Product.
• Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is
possible.
• Have an approved technician repair the Product.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...