Loading ...
Loading ...
Loading ...
1507/1503
Users Manual
2
Safety Information
Use the Tester only as specified in this manual. Otherwise, the protection provided by the Tester may be impaired. See
Table 1 for a list of symbols used on the Tester and in this manual.
A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the equipment under test.
XW
Warnings
To prevent possible electrical shock, fire, or personal injury:
• Read all safety information before you use the Product.
• Do not alter the Product and use only as specified, or the protection supplied by the Product can be
compromised.
• Carefully read all instructions.
• Do not use the Product around explosive gas, vapor, or in damp or wet environments.
• Comply with local and national safety codes. Use personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes) to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• Do not work alone.
• Examine the case before you use the Product. Look for cracks or missing plastic. Carefully look at the
insulation around the terminals.
• Do not use the Product if it is altered or damaged.
• Do not use test leads if they are damaged. Examine the test leads for damaged insulation, exposed
metal, or if the wear indicator shows. Check test lead continuity.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground.
• Use the correct terminals, function, and range for measurements.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...