Loading ...
Loading ...
Loading ...
Anticlockwise
Figure 2-12 Disassemble the Camera
2. Pry the snap joint anticlockwise to remove the
bubble, and the black liner.
Snap Joint
Figure 2-13 Remove the Bubble
3. Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes, and the cable hole (optional)
according to the drill template on the ceiling.
Note:
Cable hole is required when adopting ceiling outlet
to route the cable.
Unit: mm
41.75
41.75
2-Φ4.5
Φ98.0
Figure 2-14 Drill Template
4. Attach the mounting base to the ceiling, and secure
them with supplied screws
Figure 2-15 Attach the Mounting Base to the Ceiling
5. Route the cables through the cable hole (optional),
or the side opening.
Loading ...
Loading ...
Loading ...