Bissell 23903 Hand Vacuum Pet Hair Eraser Lithium Ion Cordless in Blue

Owner's Manual - Page 3

For 23903.

PDF File Manual, 5 pages, Read Online | Download pdf file

23903 photo
Loading ...
Loading ...
4 BISSELL.com BISSELL.com 5
1. Unplug machine from charging adapter. 2. Push power button ON.
Note: The LED light will shine GREEN while in use. When the battery level gets low, the LED light will
blink RED. When the battery is fully discharged, the LED light will shut off completely.
Using Your Vacuum
Using the Motorized Brush
The motorized brush can be used to vacuum stairs, upholstery and other hard-to-reach areas.
1. To attach motorized
brush, make sure machine is
powered OFF.
2. Firmly insert motorized
brush into nozzle of hand vac
until it clicks into place.
3. To detach, make sure machine
is powered OFF. Press button on
top of motorized brush and pull
brush out.
1. Insert tool into end of hand
vacuum and power ON.
2. Combine tools if desired.
Note: Upholstery tool rotates
clockwise and counterclockwise
for cleaning convenience.
3. If your hand vacuum came
with the 2-in-1 dusting brush,
slide it onto upholstery tool until
it clicks into place.
1. Power OFF. To remove dirt
tank, hold vacuum vertically
and press dirt tank release
button.
2. Grip filter tabs and pull up
to remove.
3. Empty dirt tank.
4. Turn filter counterclockwise
and lift out of cup.
5. To remove debris, tap filter
firmly against inside of trash
receptacle.
Note: Filter and filter cup may
be hand washed in warm water
and mild dish detergent. Rinse
thoroughly and dry completely
before reinstalling.
6. Reinstall filter into cup by
turning clockwise and lock into
place. Place filter cup back into
dirt tank.
7. Reattach tank to hand
vacuum until it clicks into place.
Emptying the Dirt Tank & Replacing the Filter
For additional support videos and information, visit support.BISSELL.com.
The dirt tank should be emptied before debris reached FULL line.
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing
maintenance or troubleshooting checks.
Do not operate vacuum with damp or wet filters, as well as without filters or the dirt tank in place. Allow components to dry
before reassembling the dirt tank.
Using the Tools
Loading ...
Loading ...