Loading ...
Loading ...
Loading ...
English 35
Installation
STEP 5 Unpack and assemble the multi tray (applicable models only)
For shipping and safety purposes, the multi tray is packed and stored in the freezer
drawer. Unpack the multi tray and assemble it beneath the fridge shelf.
• Insert the multi tray into the sliding rail
beneath the top fridge shelf.
STEP 6 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Remove the PE foam sheet on each shelf corner, which is attached to protect the
refrigerator during transportation.
2. Plug the power cord into the wall socket to turn the refrigerator on.
3. Open the door, and check if the interior light lights up.
4. Set the temperature to the coldest, and wait for about an hour. Then, the refrigerator
will be slightly chilled, and the motor will run smoothly.
5. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready
for use.
NOTE
When the refrigerator powers on, the alarm will sound. To turn off the alarm, tap , or
.
Untitled-1 35 2024-02-26() 10:54:10
Loading ...
Loading ...
Loading ...