Loading ...
Loading ...
Loading ...
2. Push and hold the power button until the
green LED comes on.
3. Use the power trigger to control the speed.
To operate the product
To trim the grass
• Hold the trimmer head immediately above
the ground at an angle. Do not push the
trimmer line into the grass.
To clear grass
1. Keep the trimmer head above the ground.
2. Tilt the trimmer head.
3. Cut with the end of the trimmer line around
objects in the work area.
CAUTION:
Cut grass. Other
objects that are hit by the
trimmer line, increases the wear
on the trimmer line.
To cut the grass
1. Make sure that the trimmer line is parallel
to the ground when you cut the grass.
2. Do not push the trimmer head to the
ground. This can cause damage to the
product.
3. Move the product from side to side when
you cut grass. Use full speed.
To sweep the grass
The airflow from the rotating trimmer line can
be used to remove cut grass from an area.
1. Hold the trimmer head and the trimmer
line parallel to the ground and above the
ground.
2. Apply full throttle.
3. Move the trimmer head from side to side
and sweep the grass.
WARNING:
Clean the trimmer
head cover each time you
assemble new trimmer line to
prevent unbalance and vibrations in
the handles. Also do a check of the
other parts of the trimmer head and
clean it if necessary.
Speed mode function
You can use the product in 3 speed modes.
• Eco mode: On the speed mode display
1 LED comes on when you operate the
product. Use the eco mode for easier tasks
and to extend the battery life.
• Normal mode: On the speed mode display
2 LEDs come on when you operate the
product. Normal mode is applicable for
most tasks. The product is set to the
normal mode when started.
• Boost mode: On the speed mode display
all 3 LEDs come on when you operate
the product. Use the boost mode for tasks
where more force is necessary.
16
2103 - 004 - 03.11.2023
Loading ...
Loading ...
Loading ...