Loading ...
Loading ...
Loading ...
UTD2000 Series User Manual
46
Chapter X Utility System
Press UTILITY to enter utility menu.
Figure 10-1 Function Key of UTILITY
Table 10-1 Utility menu (Page 1)
Function menu
Setting
Description
System Config
See chart 10-3
Enter system setup menu, the operation option include self-clibration,
system information and clear information.
Language
Select interface language, different languages can be selected.
Pass/Fail
See chart 10-4
Enter pass/fail menu, please see “10.1 Pass/Fail”for specific operation.
Recorder
See chart 10-5
Enter waveform recording menu, please see 10.2 Recorder”for specific
operation.
Next
Go to next page.
Table 10-2 Utility menu (Page 2)
Function menu
Setting
Description
Cymometer
OFF
Turn off frequency meter.
ON
Turn on frequency meter.
Local square
wave
It can be set as 10Hz, 100Hz, 1kHz, 10kHz, it defaults at 1kHz.
AUTO strategy
Enter AUTO strategy setting, the AUTO status can be set, please refer to “10.3
AUTO strategy”for specific operation.
LAN setup
Enter the dialog box of network setting.
Return
Table 10-3 System setup menu (Page 3)
Function menu
Setting
Description
Self calibration
SELECT
Execute self calibration function.
MENU
Leave self-calibration function.
System information
Display DSO system information, including Model, Hardware Version,
Software Version, etc. Press MENU button to close system information.
Clear information
Clear the stored data in DSO.
Return
Go to previous menu.
Loading ...
Loading ...
Loading ...