Loading ...
Loading ...
Loading ...
UTD2000 Series User Manual
31
NTSC
Applicable NTSC video signal.
Sync
All line
Set the video line to synchronous triggering.
Line
Set the video to sync and trigger on specific line, adjust through the
multifunctional knob on front panel.
Odd field
Set the video to sync and trigger on odd field.
Even field
Set the video to sync and trigger on even field.
Line numbers
Adjust through the multifunctional knob on front panel.
Previous
Go to previous page.
Figure 4-1 is an example screen display when PAL video trigger model is selected as
standard and the synchronization mode is selected as line synchronization. Figure 4-2 is
an example screen display when the synchronization mode is set to field synchronization.
Figure 4-1 Video Trigger: Line Synchronization
Figure 4-2 Video Trigger: Field Synchronization
4.5 Alternating trigger
During alternating trigger, the trigger signal comes from two vertical channels. Alternating
trigger is useful for observing two signals with different frequency. See the figure below for
display of triggered alternating waveform example and Table 4-7 for triggered alternating
menu setting.
Loading ...
Loading ...
Loading ...