Loading ...
Loading ...
Loading ...
13
1. To store the
STAMINA® Magnetic Rowing Machine
, simply keep it in a clean dry place.
2. Move the
STAMINA® Magnetic Rowing Machine
with the moving wheels on the FRONT
STABILIZER(3). Lift the Rear Stabilizer on the RAIL FRAME(2) to move the
STAMINA® Magnetic
Rowing Machine
. Do not use the SEAT(38) to move the
STAMINA® Magnetic Rowing Machine
. The
SEAT(38) will move and the SEAT CARRIAGE(94) may pinch your hand or ngers.
3. To avoid damage to the meter, remove the batteries before storing the
STAMINA® Magnetic Rowing
Machine
for one year or more.
4. Refer to the illustration below. You can stand the
STAMINA® Magnetic Rowing Machine
on end for
storage.
The safety and integrity designed into the
STAMINA® Magnetic Rowing Machine
can only be maintained
when the
STAMINA® Magnetic Rowing Machine
is regularly examined for damage and wear. Special
attention should be given to the following:
MAINTENANCE
STORAGE
1. Pull on the HANDLEBAR(5) and verify that the Magnetic System provides tension and the seat travel
is smooth and stable.
2. Clean the roller tracks in the RAILS(30) with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Check the condition of the STRAP(43). Replace the STRAP(43) if it is cracked or broken.
5. Verify that the CAUTION LABEL(31) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(31) if it is missing or damaged.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components must be replaced immediately or the
STAMINA® Magnetic Rowing
Machine
removed from service until repair is made.
8. Only Stamina Products supplied components should be used to maintain/repair the
STAMINA®
Magnetic Rowing Machine
.
9. Keep your STAMINA® Magnetic Rowing Machine clean by wiping it o󰀨 with an absorbent cloth after use.
Loading ...
Loading ...
Loading ...