Loading ...
Loading ...
Loading ...
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.4.2 Wall Mounting without Junction Box
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Ø10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-29 Fix the Wall Mount
3. Rotate the camera counterclockwise to remove the
trim ring.
Figure 2-30 Remove Trim Ring
4. Use three PM4 × 10 screws to fix the installation
plate onto the wall mount.
Figure 2-31 Fix the Installation Plate
5. Refer to steps 3 to 5 of Section 2.3.6 Ceiling
Mounting without Junction Box to finish installation.
Loading ...
Loading ...
Loading ...