Loading ...
Loading ...
Loading ...
INSTALLING THE DISHWASHER
Step 11 Wiring Connections
Before connecting the power cable to the dishwasher, m ake sure the circuit breaker is off.
In the junction box located at the f ront bottom right of t he dishwasher, f ind the three power w ires f rom the
dishwasher including the grounding line.
Pass the power cable through the strain relief, a nd then into the junction box (Figure 1 4).
Connect the black w ire of the dishwasher to the black w ire of t he power cable by inserting both into a w ire nut
and then rotating the w ire connector as shown in Figure 1 5.
Connect the w hite w ire to the w hite w ire and the green to the green in the same manner.
Recheck e ach w ire to e
nsure it is connected correctly and securely.
Each colored w ire should be connected to the corresponding w ire of t he same color.
White should be connected to w hite, b lack t o black, a nd green to green.
Replace the junction box cover on the dishwasher.
1.
2.
3.
4.
5.
6.
Electrical Shock H azard
To a void electrical shock, d o not work o n an energized circuit.
Doing so could result in serious injury or death. O nly qualified
electricians should perform electrical work. D o not attempt
any work o n the dishwasher e lectric supply circuit until you are
certain the circuit is de-ener
gized.
Fire Hazard
To a void a f ire hazard, m ake sure electrical w ork i s properly
installed. O nly qualified electricians should perform electrical
work.
Recheck e ach w ire to ensure it is connected correctly and securely.
Each colored w ire should be connected to the corresponding w ire of t he same color.
Power cable
Junction box
Strain relief
Black t o black
White to white
G reen to green
(Ground to ground)
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
K7740D
Loading ...
Loading ...