Geovision GV-APOE2411 Geovision GV-APOE2411 User Manual

Loading ...

Web-based Switch Configuration

63



2

2.7. Discovery

Use this section to configure LLDP.

2.7.1. LLDP

LLDP is a one-way protocol; there are no request/response sequences. Information is

advertised by stations implementing the transmit function, and is received and processed by

stations implementing the receive function. The LLDP category contains LLDP and LLDP-

MED pages.

2.7.1.1. Property

To display LLDP Property Setting web page, click Discovery > LLDP > Property.

Figure 68 - Discovery > LLDP > Property

Item Description

State Enable/ Disable LLDP protocol on this switch.

LLDP Handling

Select LLDP PDU handling action to be filtered, bridging o

flooded when LLDP is globally disabled.

Filtering: Deletes the packet.

Bridging: (VLAN-aware flooding) Forwards the packet to all

VLAN members

Flooding: Forwards the packet to all ports

TLV Advertise Interval

Select the interval at which frames are transmitted. The defaul

is 30 seconds, and the valid range is 5–32767 seconds.

Hold Multiplier

Select the multiplier on the transmit interval to assign to TTL

(range 2–10, default = 4).

Reinitializing Delay

Select the delay before a re-initialization (range 1–10 seconds,

default = 2).

Transmit Delay

Select the delay after an LLDP frame is sent (range 1– 8191

seconds, default = 3).

Fast Start Repeat Count

Select fast start repeat count when port link up (range 1–10,

default = 3).

Loading ...

Geovision GV-APOE2411 24 Port Gigabit 802.3at Web Management PoE Switch