Loading ...
Loading ...
Loading ...
Web-based Switch Configuration
155
2
Destination
Port
Select the type of protocol for a match. Only available when protocol
is TCP or UDP.
●
Any: All source ports are acceptable.
●
Single: Enter a single TCP/UDP source port to which
packets are matched.
Range: Select a range of TCP/UDP source ports to which the packet
is matched. There are eight different port ranges that can be
configured (shared between source and destination ports). TCP and
UDP protocols each have eight port ranges.
Destination
Port
Select the type of protocol for a match. Only available when protocol
is TCP or UDP.
●
Any: All source ports are acceptable.
●
Single: Enter a single TCP/UDP source port to which
packets are matched.
●
Range: Select a range of TCP/UDP source ports to which the
packet is matched. There are eight different port ranges that can
be configured (shared between source and destination ports). TCP
and UDP protocols each have eight port ranges.
TCP Flags
Select one or more TCP flags with which to filter packets. Filtered
packets are either forwarded or dropped. Filtering packets by TCP
flags increases packet control, which increases network security.
Only available when protocol is TCP.
Type of
Service
Select the type of service for a match.
●
Any: All types of service are acceptable.
●
DSCP to match: Enter a Differentiated Serves Code Point
(DSCP) to match.
●
IP Precedence to match: Enter a IP Precedence to match.
ICMP Type
Either select the message type by name or enter the message type
number. Only available when protocol is ICMP.
●
Any: All message types are acceptable.
●
Select from list: Select message type by name.
●
Protocol ID to match: Enter the number of message type.
ICMP Code
Select the type for ICMP code. Only available when protocol is ICMP.
●
Any: All codes are acceptable.
●
User-defined: Enter an ICMP code to match.
Loading ...
Loading ...
Loading ...