Loading ...
Loading ...
Loading ...
Airo 4 Electric Panel Heater OIM
IMPORTANT
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and to ensure
optimum performance.
Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in
personal injury or death.
WARNINGS: Indicates a potentially hazardous situation which, if not avoided, could result in
personal injury or death.
CAUTIONS: Indicates a potentially hazardous situation which, if not avoided, could result
in minor or moderate injury or damage to the appliance. It may also be used to alert against
unsafe practices.
WARNING
REGULATORY / INSTALLATION
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions.
• Current AS/NZ 3000.
It is important that the following precautions are followed to minimise the risk of overheating, re,
electric shock and injury:
Handle the appliance with care, avoid vibrations and knocks. Unpack the appliance and check for
damage. DO NOT INSTALL A DAMAGED APPLIANCE. If the appliance is damaged or defective,
contact your supplier for advice, the appliance may ONLY be serviced by the manufacturer or the
manufacturer’s agent or similarly qualied person.
DO NOT install or use the appliance if the power cord is damaged. If it is damaged or requires
replacing, it MUST be replaced by the manufacturer or the manufacturer’s agent or similarly qualied
person.
Ensure that the voltage and frequency of the power supply correspond to the ratings on the data plate
of the appliance.
The heater is tted with an Australian exible cord and 3 pin plug intended for connection to an
Australian 10 Amp socket outlet. It is not suitable for connection in other countries or alternative power
supplies. Ensure that the voltage and frequency of the power supply correspond to the ratings on the
dataplate of the appliance.
DO NOT use power boards or double adaptors for this appliance.
This heater MUST not be located immediately directly in front of a socket-outlet.
DO NOT connect the appliance to the mains power until it has been installed in its nal location and
adjusted to the position it will be used in.
The installation MUST BE equipped with an all-pole disconnection mechanism in accordance with
wiring rules.
If used as a portable heater, DO NOT use in the immediate surroundings of a bath, a shower or a
swimming pool.
If used as a portable heater, unplug and allow to cool before placing in storage.
If used as a portable heater, DO NOT move whilst it is turned on.
DO NOT handle any parts of the heater, including the plug and exible cord, with wet or damp hands.
DO NOT immerse the appliance, exible cord and plug in water or any other liquid.
DO NOT place containers of any liquid or wax on top of the heater.
WARNINGS AND IMPORTANT INFORMATION
Loading ...
Loading ...
Loading ...