Loading ...
Loading ...
Loading ...
Airo 15 Electric Panel Heater OIM
1. Be sure heater is unplugged before attempting to install the castor components.
2. Assemble the 2 castors (A) to the each castor foot (B) by pushing the metal shaft fully home.
3. Place the heater in an ‘upside down’ position with the back of the heater facing you.
4. Remove the two of the pre-installed case screws (C) from the base of the appliance (D).
5. With the front end of the castor assembly pointed towards the front of the heater, align the two holes (E) in
the castor foot with the two holes in the base the appliance (D) and x in place with the screws (C) removed
in step 4.
6. Repeat steps 4 and 5 to install the second castor assembly.
7. Rotate the heater back to the upright position and remove the cable tie from the exible cord, then insert the
power plug of the heater directly into a power socket outlet.
IMPORTANT
DO NOT bundle or coil the exible cord to reduce the length as overheating and subsequent re
hazard could result.
8. The heater is now ready to be used as a free standing appliance. Refer to the operation section at the front
of this manual for full instructions on how to use the heater.
A
B
Front of
castor
assembly
E
A B
C
C
A B
Back of heater
D
D
INSTALLATION
Loading ...
Loading ...
Loading ...