Loading ...
Loading ...
Loading ...
DS-K1100 Series Card Reader
9
Color
Description
Orange
Red LED Control (available for Wiegand Protocol)
Red
PWR (DC +12V)
2.3 Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for RS-485 communication mode:
1. Set the DIP switch of No. 6 as 0.
2. Set the DIP switch of No. 1 ~ 4 for RS-485 address. For
details, please refer to 2.1 Introduction for DIP Switch.
3. Wire the cable between controller and card reader as
shown below.
Loading ...
Loading ...
Loading ...