UNIMAC TOLACMUM5CFVA Portable Electric Air Compressor 2HP User Manual

ACM-500sv Oil-Free Air Compressor

User Manual

[Revision 2.0 December 2023]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

ACM-500sv Oil-Free Air Compressor

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• WARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

General Safety Warnings

• WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW, MAY RESULT

IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.

• Read all instructions. Know your power tool. Read the operator’s manual carefully. Learn the applications and limitations as well as the specific

potential hazards related to this tool.

Work Area Safety

• Keep work area clean. Cluttered areas and benches invite accidents. Do not leave tools or pieces of wood on the tool while it is in operation.

• Do not use in dangerous environments. Do not use power tools in damp or wet locations or expose to rain. Keep the work area well lit.

• Keep children and visitors away. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact

tool or extension cord while operating.

• Never use in an explosive atmosphere. Normal sparking of the motor could ignite fumes.

Electrical Safety

• Guard against electrical shock by preventing body contact with grounded surfaces, e.g., pipes, radiators, ranges, refrigerator enclosures.

• Do not abuse cord. Never carry tool by the cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

• Should any electrical component of the tool fail to perform properly, shut off the power switch, remove the plug from the power source and

replace before resuming operation.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Personal Safety

• Stay alert and exercise control. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.

• Dress properly. Do not wear loose clothing, neckties, or jewellery that can get caught and draw you into moving parts. Rubber gloves and non-

skid footwear are recommended when working outdoors. Also wear protective hair covering to contain long hair.

• Always wear safety glasses with side shields. Everyday eyeglasses have only impact resistant lenses; they are not safety glasses.

• Protect your lungs. Wear a face or dust mask if the operation is dusty.

• Protect your hearing. Wear hearing protection during extended periods of operation.

• Do not overreach. Always keep proper footing and balance.

• Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it

on.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Air Compressor Use and Care

• Do not exceed the pressure rating of any component in the system.

• Protect material lines and air lines from damage or puncture. Keep hose and power cord away from sharp objects, chemical spills, oil, solvents,

and wet floors.

• Check hoses for weak or worn condition before each use, making certain all connections are secure. Do not use if defect is found. Purchase a

new hose or notify an authorized service centre for examination or repair.

• Release all pressures within the system slowly. Dust and debris may be harmful.

• Store idle air compressors out of the reach of children and other untrained persons. Air compressors are dangerous in the hands of untrained

users.

• Maintain air compressors with care. Follow maintenance instructions. Properly maintained products are easier to control.

• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the product’s operation. If

damaged, have the air compressor serviced before using. Many accidents are caused by poorly maintained products.

• Keep the exterior of the air compressor dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids,

gasoline, petroleum-based products, or any strong solvents to clean the unit. Following this rule will reduce the risk of deterioration of the

enclosure plastic.

Service

• When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. Save these

instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.

Air Compressor Safety Warnings

• Know your air compressor. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards

related to this product. Following this rule will reduce the risk of electric shock, fire, or serious injury.

• Drain tank of moisture after each day’s use. If unit will not be used for a while, it is best to leave drain valve open until such time as it is to be

used. This will allow moisture to completely drain out and help prevent corrosion on the inside of tank.

• Risk of fire or explosion. Do not spray flammable liquid in a confined area. Spray area must be well ventilated. Do not smoke while spraying or

spray where spark or flame is present. Keep compressors as far from the spraying area as possible, at least 10 m (33 feet) from the spraying

area and all explosive vapours.

• Risk of bursting. Do not adjust regulator to result in output pressure greater than marked maximum pressure of attachment. Do not use at

pressure greater than 115 psi.

• If connected to a circuit protected by fuses, use time delay fuses with this product.

• To reduce the risk of electric shock, do not expose to rain. Store indoors.

• Inspect tank yearly for rust, pin holes, or other imperfections that could cause it to become unsafe.

• Never weld or drill holes in the air tank.

• Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of balance or footing and may become damaged.

• Use the air compressor only for its intended use. Do not alter or modify the unit from the original design or function.

• Always be aware that misuse and improper handling of this product can cause injury to yourself and others.

• Never leave a tool unattended with the air hose attached.

• Never point any air tool toward yourself or others.

• Do not operate this air compressor if it does not contain a legible warning label.

• Do not continue to use a tool or hose that leaks air or does not function properly.

• Always disconnect the air supply and power supply before adjusting, servicing a product, or when a product is not in use.

• Do not attempt to pull or carry the air compressor by the hose.

• Your tool may require more air consumption than this air compressor can provide.

• Always follow all safety rules recommended by the manufacturer of your air tool, in addition to all safety rules for the air compressor. Following

this rule will reduce the risk of serious personal injury.

• Never direct a jet of compressed air toward people or animals. Take care not to blow dust and dirt towards yourself or others. Following this rule

will reduce the risk of serious injury.

• Do not use this air compressor to spray chemicals. Your lungs can be damaged by inhaling toxic fumes. A respirator may be necessary in dusty

environments or when spraying paint. Do not carry while painting.

• Inspect product cords and hoses periodically and, if damaged, have them repaired at your nearest authorised service centre. Constantly stay

aware of cord location. Following this rule will reduce the risk of electric shock or fire.

• Never use an electrical adaptor with this grounded plug.

• Check for damaged parts. Before further use of the air compressor or air tool, a guard or other part that is damaged should be carefully checked

to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly

repaired or replaced by an authorized service centre. Following this rule will reduce the risk of serious injury.

• Never store a tool with an air line connected. Storing the tool while connected to an air supply can result in unexpected operation, firing or

movement and possible serious personal injury.

• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

• If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorised service centre to avoid risk.

• Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product,

loan them these instructions also.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

• The machine shall be connected to a circuit protection device (fuse or circuit breaker).

• Operate the machine from the front of the control panel.

• When the machine is in operation, many parts of machine may cause a high temperature. Use necessary personal protection equipment such as

gloves to avoid injuries resulting from a high temperature.

• This machine is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience

and knowledge. Children should be supervised to ensure that they do not play with the machine.

Personal Protective Equipment

• CAUTION! WEAR PROTECTIVE CLOTHING AND SAFETY EQUIPMENT TO PROTECT YOURSELF.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 6

Parts Identification ....................................................................................................................................... 9

Unpacking and Assembly .......................................................................................................................... 10

Unpacking ................................................................................................................................................................. 10

Assembly .................................................................................................................................................................. 10

Wheel Fitment ........................................................................................................................................................... 10

Rubber Feet Fitment ................................................................................................................................................. 10

Air Filter Fitment ....................................................................................................................................................... 10

Operation ..................................................................................................................................................... 11

Starting And Stopping Your Air Compressor ............................................................................................................ 11

Adjusting Outlet Air Pressure ................................................................................................................................... 11

Safety Valve .............................................................................................................................................................. 12

Drain Tap .................................................................................................................................................................. 12

Using the Air Compressor ........................................................................................................................................ 13

Maintenance ................................................................................................................................................ 14

Troubleshooting ......................................................................................................................................... 15

Specifications ............................................................................................................................................. 15

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Parts Identification

No. Name No. Name

1 Pressure Regulator 6

Air Tank Drain Tap

(not visible on image)

2

Pressure Switch ON / OFF button

(not visible on image)

7

Rubber Stoppers

(not visible on image)

3

Air Filter

8

Motor

4 Air Tank 9

Safety Valve

(not visible on image)

5

Wheel

1

4

8

5

7

6

3

9

2

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Unpacking and Assembly

Unpacking

Carefully unpack your air compressor. This air compressor is bulky and heavy; two (2) person lift required.

Dispose of all packing material in an environmentally responsible manner.

Assembly

Your air compressor requires minor assembly before initial operation. Check that you have all the components

required for assembly and initial use.

Wheel Fitment

1. Insert a bolt through the wheel with the long end of the axle facing the compressor.

2. Push the end of the bolt with the wheel attached through the bracket on the side of the air tank.

3. Tighten the nut

Rubber Feet Fitment

Attaching the rubber feet to the bracket located towards the front on the bottom of the tank.

1. Undo the nut and remove the washers from the rubber feet.

2. With another person lifting the front of the compressor by the handle, push the bolt through the hole in the

bracket underneath the air tank.

3. Attach the washer and tighten the nut. Do not over tighten.

Air Filter Fitment

The air filters must be used. Failure to do so may result

in irreparable damage and will void the warranty.

Carefully screw each air filter into the threaded hole on the

side of the pump head in a clockwise direction. The air filters

only need to be tightened by hand. Do not use tools to

tighten the air filter.

NOTE: Do not OVER TIGHTEN as this may damage the air filter or cylinder head, which will NOT be

covered under warranty.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Operation

Starting And Stopping Your Air Compressor

NOTE: Always ensure that you plug your air compressor into a

standard 240V 10Amp AC power point. Never use an extension cord as

this can lead to a voltage drop which may cause damage to the

compressor. Use a longer air hose if you need to get closer to your

work area.

Always start and stop the compressor using the ON/OFF button on the

Pressure Switch. Damage caused by not using the ON/OFF switch will

not be covered by warranty.

To turn your air compressor ON:

Lift up the ON / OFF switch on top of the pressure switch.

To turn your air compressor OFF:

Push down the ON / OFF switch on top of the pressure switch.

Adjusting Outlet Air Pressure

To adjust the outlet air pressure, turn the regulator knob and check the

pressure on the smaller outlet pressure gauge.

•

If pressure needs to be lowered, turn the knob anticlockwise.

•

If pressure needs to be increased, turn the knob clockwise.

Note: Different air tools require different operating pressures. Always check with the tool manufacturer if

unsure.

A. Air tank pressure gauge

B. Pressure regulator

C. Outlet air quick connect

ON

OFF

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Safety Valve

Note: When checking the safety valve ALWAYS wear safety glasses. To check the operation of the

safety valve, the air tank will need to be full.

1. Gently pull the ring on the safety valve outwards. This should release air under pressure.

2. Release the ring and this should stop the air out flow immediately.

3. If the safety valve does NOT work in this manner, STOP the air compressor immediately and have it

checked/ serviced by an authorised service centre.

Drain Tap

After use, open the drain tap slowly to release any moisture that has accumulated in the tank. The air tank will

need to be pressurised to help purge the moisture from the system. Leave the drain tap open when the air

compressor is not in use to allow all moisture to drain from the tank.

•

To open the drain tap, rotate the lever down to vertical.

•

To seal the drain tap, rotate the lever up to a horizontal position.

Note: Ensure the drain tap is closed before starting the compressor.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Using the Air Compressor

Before starting, run through this simple list:

1. Air tank drain tap – Close fully.

2. ON/OFF switch – Is the ON/OFF switch in the OFF position (pushed down)?

3. Connect the air hose and air tool to the air compressor. Check the air hose for damage or any holes. Ensure

quick connector is fully inserted by gently tugging on the end of it.

4. Check the power lead for any damage. If damaged, have it replaced by an authorised service centre.

5. Plug the power lead into a standard 240V 10 Amp AC power point and turn ON the power.

6. Turn on the compressor by lifting the ON/OFF switch.

7. Allow the air compressor to fill the air tank. The air compressor will automatically switch OFF once the air

tank reaches approximately 115 psi in pressure.

8. Regulate required outlet pressure to desired pressure. During use, the air compressor will start and stop

which is normal and is controlled by the pressure switch. The pressure switch is set by the manufacturer and

these settings cannot be changed. Once the initial “‘pump up” stage has finished, and the compressor has

stopped you can adjust the outlet air pressure to the tools recommended working pressure.

When you have finished using your air compressor follow these six simple steps:

1. Turn your air compressor OFF by pushing the ON/OFF switch down.

2. Turn the power point OFF and disconnect the power lead.

3. Very slowly open the air tank drain tap.

Note: It is quite normal for moisture (water) to be exhausted during tank venting.

4. Disconnect your air tools and air hose.

Note: Wear eye and ear protection.

5. Clean and store your air hose and air tools. Store in a secure well-ventilated cabinet.

6. Leave the air tank drain tap open. This allows any moisture to drain while the air compressor is stored.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Maintenance

ATTENTION: Surface corrosion will occur on metal surfaces over time and the rate of oxidation

depends on factors such as proximity to the ocean and humidity or condensation of water

vapour on metal surfaces. To mitigate this, WD40 can be used to remove surface corrosion then, when

applied periodically, it will prevent rust from forming.

Follow these basic maintenance instructions to ensure long, trouble free operation.

Daily:

•

Drain moisture from air tank.

•

Check for air leaks.

Weekly:

•

Remove air filter element and clean or replace as required.

•

Verify cut out/in pressure for correct operation.

Monthly:

•

Inspect non-return valve (clean or replace as required).

CAUTION: Ensure tank is empty.

•

Manually test the safety valve by pulling the ring.

Quarterly:

•

Tighten cylinder head bolts to correct torque.

•

Clean & check valve assembly, replace gaskets/valves if worn or damaged.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Troubleshooting

If your compressor does not start:

•

Check that you have plugged the power lead into a standard 240V 10Amp power point and turned the switch

ON.

•

Check that you have pulled the air compressor ON/OFF switch out to the ON position.

•

Is the air tank full of air? Use your air tool and the air compressor should start when the pressure decreases

to 87 psi.

If your compressor does not build up pressure:

•

Check that the air tank drain tap is closed and seals (should be in the horizontal position).

•

Check that there are no leaks in air fittings hoses or air tools.

CAUTION: ALWAYS ENSURE POWER SUPPLY IS SWITCHED OFF AND UNPLUGGED FROM THE WALL

BEFORE SERVICING.

Specifications

Air Displacement 254L/Min (8.9 CFM)

Free air delivery @ 7bar 125L/Min (4.4 CFM)

Receiver capacity 50 L

Working pressure 116PSI (8bar)

Restart pressure 86PSI (6bar)

Starting method Automatic Pressure Control Switch

Motor Power 1.5KW (2.0hp)

Motor Input 230~240V 50Hz

IP Rating IP20

Plug SAA 240V 10A

Power Plug Australian Standard

Pump speed 2850 rpm

Noise Level Lpa=62 dBa

Fill time 0~8bar 145"

Refill time 6~8bar 44"

Duty Cycle 0.75

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

ACM-500sv Oil-Free Air Compressor

Measurement System Metric

Rubber tyres Yes

Oil Free Yes

Note: Minimal Assembly Required

Note: Prior to installing and operating this air compressor, it is the buyer’s responsibility to check and adjust

valves/fittings to prevent air leaks.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

UNIMAC TOLACMUM5CFVA Portable Electric Air Compressor 2HP 50L Silent Oil-Free

Product's Documents

Product manual

Specifications

UNIMAC TOLACMUM5CFVA Questions and Answers