Quick Start Guide
TheOontZ.com
Designed and Engineered By
In the Package
Quick-Start Guide
Micro USB Power Adapter
3.5mm Audio Cable
Digital Audio Optical Cable
Thank you for being an OontZ Bluetooth Adapter Owner!
This User Guide rst covers the steps to connect your OontZ Bluetooth Adapter to your TV or
device (Laptop, Computer, Tablet, Mac, iPad, or Music Receiver), with the included Digital
Audio Optical Cable or the 3.5mm Audio Cable. Then the steps to connect the OontZ
Bluetooth Adapter wirelessly over Bluetooth to one or two of these Supported OontZ Speaker
Models:
SUPPORTED OONTZ SPEAKER MODELS
- OontZ Angle 3 ULTRA
- OontZ Angle 3XL ULTRA
- OontZ Angle 3 RainDance
• To connect and play to two OontZ Speakers both speakers must be the same model.
• The OontZ Bluetooth Adapter will only work with the Supported OontZ Speaker
Models, for the latest list of supported OontZ speakers please visit
TheOontZ.com/BT-Adapter
The OontZ Bluetooth Adapter is designed to transmit the audio from your TV or device to the
OontZ Speaker(s) with our Low latency Feature. The Low Latency Feature reduces delays that
occur in the Bluetooth transmission of the audio which can cause lip sync issues when playing
a video on your TV or device and playing the audio wirelessly through one or two OontZ
Speakers.
Before Getting Started with your OontZ Bluetooth Adapter please
review these important notes:
OontZ Speaker Firmware Version Requirements
Your OontZ Speaker(s) need to be on the current version of Firmware, to work with the OontZ
Bluetooth Adapter:
Current Firmware Requirements
- OontZ Angle 3 ULTRA: Version 2.15 or later (please see page 19 for instructions on how to check
Firmware Version)
- OontZ Angle 3XL ULTRA: Version 3.3.6 or later (please see page 20 for instructions on how to
check Firmware Version)
- OontZ Angle RainDance: All versions of Firmware work with the OontZ Bluetooth Adapter
If your OontZ Speaker(s) are on an earlier Firmware version, you will need to update each speaker to
the current Firmware version. If you have two OontZ Speakers, they both need to be on the same
current version of Firmware.
Volume Control
Some model TVs (and other devices) when connected to the OontZ Bluetooth Adapter are not able
to adjust the volume playing through the OontZ Speaker(s) by the TV’s remote control or physical
buttons on the TV. In this case you will need to use the volume buttons on each speaker to adjust
the volume. If your TV allows the volume playing through the OontZ Speakers(s) to be adjusted
from the TV’s remote control we would recommend that you initially set the volume on each
speaker to maximum using the volume buttons on each speaker and use the remote control to
adjust volume.
Buttons and Lights
Connectors
Connecting with Television Using Digital Audio Optical Cable
Connecting with Television Using 3.5mm Audio Cable
Connecting with Devices Using 3.5mm Audio Cable
Turning On the OontZ Bluetooth Adapter
Connecting Your OontZ Bluetooth Adapter with One Supported OontZ Speaker
Connecting Your OontZ Bluetooth Adapter with Two Supported OontZ Speaker
Play Your Audio Wirelessly in Dual Stereo
Play Your Audio Wirelessly with Left-Right Stereo Separation
Changing Between Left Channel-Right Channel and Dual Stereo
Troubleshooting
Reset Function
Checking OontZ Angle 3 ULTRA Firmware Version
Checking OontZ Angle 3XL ULTRA Firmware Version
Other Important Notes
Contacting Customer Support
Safety and Precautions
Table of Contents
1
2
3
4
5
6
7 - 9
10 - 12
13
14
15
16 - 17
18
19
20
21
22
23 - 24
Pages
SPK 2 (Speaker 2)
Blue Indicator Light
Buttons and Lights
Page 1
Bluetooth Button
L/R White Indicator Light
- Lit when connected to
two OontZ Speakers in
Left-Right Channel Mode
for stereo separation
SPK 1 (Speaker 1)
Blue Indicator Light
DS Orange Indicator Light
- OontZ Speaker(s) are in
Dual Stereo Mode,
speaker(s) will play full
stereo
Speaker Mode Button
- Used when connected to
two OontZ Speakers to
change between Dual Stereo
Mode and Left - Right
Channel Mode
SPK 2 (Speaker 2)
Blue Indicator Light
Connectors
Page 2
Optical/Audio In Connector used
for 3.5mm Audio Cable or
Digital Audio Optical Cable
DC IN Power Connector
used for Micro USB Power
Adapter
Connecting with Television Using Digital Audio Optical Cable
Page 3
- Plug the longer end of the Digital Audio Optical Cable into the Optical/Audio
In Connector on the OontZ Bluetooth Adapter as shown below.
- Plug the shorter end of the Digital Audio Optical Cable into the Optical -
Digital Audio Out on your TV as shown below.
- Make sure both ends of the cable are fully inserted.
We recommend to connect to your TV using the Digital Audio Optical Out Connector. If the TV does
not have a Digital Audio Optical Out Connector, use the Analog Audio Connection as described on
Page 4.
ANALOG
AUDIO OUT
L R
DIGITAL
AUDIO OUT
OPTICAL
Digital Audio Optical Cable is included
AUDIO
OUT
Connecting with Television Using 3.5mm Audio Cable
Page 4
- Plug one end of the 3.5mm Audio Cable into the Optical/Audio In Connector on the OontZ
Bluetooth Adapter.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on
your television.
- Make sure both ends of the cable are fully inserted.
-If your TV does not have a Headphone Connector or Audio-Out Connector but does have Left
Right Analog Audio Out you will need a 3.5mm to RCA cable as shown below.
ANALOG
AUDIO OUT
L R
3.5mm to 3.5mm Audio Cable (included)
OR
3.5mm to RCA audio cable is sold seperately
and is available at:
TheOontZ.com/accessories
AUDIO OUT
HEADPHONE
OUT
- or -
DIGITAL
AUDIO OUT
OPTICAL
L
R
Connecting with Devices Using 3.5mm Audio Cable
Page 5
- Plug one end of the 3.5mm Analog Cable into the Optical/Audio In Connector on the OontZ
Bluetooth Adapter.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on your
device.
- Make sure both ends of the cable are fully inserted.
OR
Turning On the OontZ Bluetooth Adapter
Page 6
Step 2: Insert the small end of the Micro USB
Charging Adapter into the DC IN Micro USB
Charging Connector as shown
Step 1: Connect the wall plug end of the
Micro USB Charging Adapter into a
power outlet.
Step 3: SPK1 will be lit indicating the OontZ
Bluetooth Adapter is ON
- If the SPK1 Blue light is slowly ashing on your
OontZ Blueooth Adapter it is ready to connect to
your OontZ Speaker(s)
- If the SPK1 is solid Blue your Oontz Bluetooth
Adapter has reconnected to a supported OontZ
speaker and is ready to play.
Step 1: Turn ON your OontZ speaker.
The blue light on the OontZ Speaker will be lit:
- If the blue light on the OontZ Speaker is ashing it is ready to connect with the OontZ Bluetooth
Adapter.
- If the blue light on the OontZ Speaker is solid it has automatically reconnected with the last device it
was connected to. In order to connect with the OontZ Bluetooth Adapter you need to rst disconnect
the OontZ Speaker, from that device. Press and hold down the Bluetooth Button on the OontZ
Speaker for 5 seconds.
- The blue light will begin ashing and the OontZ Speaker is ready to connect with the OontZ
Bluetooth Adapter.
Step 2: Check that the OontZ Bluetooth Adapter is turned on, the SPK 1 blue light will be lit.
- If the SPK 1 blue light on the OontZ Bluetooth Adapter is ashing it is ready to connect with the
OontZ Speaker.
- If the SPK 1 blue light on the OontZ Bluetooth Adapter is solid it has automatically reconnected
with the last OontZ Speaker it was connected with. In order to connect with the new OontZ
Speaker you need to disconnect the current OontZ Speaker. Press and hold down the Bluetooth
Button on the OontZ Bluetooth Adapter for 5 seconds.
- The SPK 1 blue light on the Bluetooth Adapter will begin ashing and it is ready to connect with
the OontZ Speaker.
Connecting Your OontZ Bluetooth Adapter with One Supported
OontZ Speaker
(To connect with Two supported OontZ Speakers refer to Page 10)
Page 7
Step 3: Press and release the Bluetooth Button on the OontZ Bluetooth Adapter. The SPK 1 and SPK 2
blue lights will alternate ashing. *
- The SPK 1 blue light will turn solid, to indicate the OontZ Bluetooth Adapter has connected with your
OontZ speaker.
- The OontZ Bluetooth Adapter will continue to search for a second OontZ Speaker for a total of 60
seconds, then the ashing SPK2 blue light will turn o.
- The OontZ Bluetooth Adapter is now ready to transmit the audio over Bluetooth and play through the
OontZ speaker.
*Your OontZ Bluetooth Adapter needs to be within 10 unobstructed feet of the OontZ Speakers to pair and
connect. If there is an issue when connecting please move your speakers closer to the OontZ Bluetooth
Adapter, then pair and connect.
Connecting Your OontZ Bluetooth Adapter with One Supported
OontZ Speaker
Page 8
Connecting Your OontZ Bluetooth Adapter with One Supported
OontZ Speaker
Page 9
Note 1: The OontZ Bluetooth Adapter will try to automatically reconnect with last OontZ Speaker it was
connected with each time the OontZ Speaker is turned on and is within range.
Note 2: In order to pair and connect the OontZ Bluetooth Adapter with a dierent Supported OontZ
Speaker, you need to rst disconnect the currently connected OontZ Speaker.
- To disconnect the currently connected OontZ Speaker, press and hold down the Bluetooth Button
on the OontZ Bluetooth Adapter for 5 seconds.
- The SPK 1 blue light will begin ashing and the OontZ Bluetooth Adapter is ready to connect to a
dierent OontZ Speaker.
Note 3: Note: If you wish to later connect a second OontZ Speaker to the OontZ Bluetooth Adapter the
second speaker needs to be the same OontZ Speaker model and needs to be on the same level of
Firmware as the rst speaker.
- With your OontZ Bluetooth Adapter Turned On and the rst OontZ Speaker turned on and connected
to it, turn on your second OontZ Speaker.
- Press and release the Bluetooth Button on the OontZ Bluetooth Adapter. The SPK 1 and SPK 2 blue
lights will alternate ashing.
- SPK1 and SPK2 blue lights will both turn solid blue to indicate the OontZ Bluetooth Adapter has
connected with both OontZ Speakers.
. The OontZ Bluetooth Adapter is now ready to transmit the audio over Bluetooth and play through
both OontZ Speakers.
Connecting Your OontZ Bluetooth Adapter with Two Supported
OontZ Speakers
(To connect with One supported OontZ Speakers refer to Page 7)
Page 10
Step 1: Turn ON your OontZ Speakers.
The blue light on both OontZ Speakers will be lit:
- If the blue light on both OontZ Speakers are ashing they is ready to connect with the OontZ
Bluetooth Adapter.
- If the blue light on either OontZ Speaker is solid it has automatically reconnected with the last device
it was connected to. In order to connect with the OontZ Bluetooth Adapter you need to rst
disconnect the OontZ Speaker(s), from that device. Press and hold down the Bluetooth Button on
the OontZ Speaker for 5 seconds.
- The blue light will begin ashing and the OontZ Speaker is ready to connect with the OontZ
Bluetooth Adapter.
Step 2: Check that the OontZ Bluetooth Adapter is turned on, the SPK 1 blue light will be lit.
- If the SPK 1 blue light on the OontZ Bluetooth Adapter is ashing it is ready to connect with the
OontZ Speaker.
- If the SPK 1 blue light on the OontZ Bluetooth Adapter is solid it has automatically reconnected
with the last OontZ Speaker it was connected with. In order to connect with the new OontZ
Speakers you need to disconnect the current OontZ Speaker. Press and hold down the Bluetooth
Button on the OontZ Bluetooth Adapter for 5 seconds.
- The SPK 1 blue light on the Bluetooth Adapter will begin ashing and it is ready to connect with
the OontZ Speakers.
Connecting Your OontZ Bluetooth Adapter with Two Supported
OontZ Speakers
Page 11
Step 3: Press and release the Bluetooth Button on the OontZ Bluetooth Adapter. The SPK 1 and SPK 2
blue lights will alternate ashing. *
- The SPK 1 light will turn solid blue, to indicate the OontZ Bluetooth Adapter has connected with one
of your OontZ Speakers.
- The OontZ Bluetooth Adapter will continue to search for the second OontZ Speaker for up to 60
seconds.
- The SPK2 light will turn solid blue, to indicate the OontZ Bluetooth Adapter has connected with the
second OontZ Speaker.
- The OontZ Bluetooth Adapter is now ready to transmit the audio over Bluetooth and play through the
OontZ Speakers.
Step 4: If the SPK2 blue light turns o after 60 seconds, the second OontZ Speaker was not found.
- Make sure both OontZ Speakers are the same model.
- Make sure both OontZ Speakers are on the same version of rmware.
•
Refer to page 19 for the OontZ Angle 3 ULTRA on how to check the version of rmware.
•
Refer to page 20 for the OontZ Angle 3XL ULTRA on how to check the version of rmware.
*Your OontZ Bluetooth Adapter needs to be within 10 unobstructed feet of the OontZ Speakers to pair and
connect. If there is an issue when connecting please move your speakers closer to the OontZ Bluetooth
Adapter, then pair and connect.
Connecting Your OontZ Bluetooth Adapter with Two Supported
OontZ Speakers
Page 12
Note 1: The OontZ Bluetooth Adapter will try to automatically reconnect with last OontZ Speaker it was
connected with each time the OontZ Speaker is turned on and is within range.
Note 2: In order to pair and connect the OontZ Bluetooth Adapter with dierent Supported OontZ
Speakers, you need to rst disconnect the currently connected OontZ Speakers.
- To disconnect the currently connected OontZ Speakers, press and hold down the Bluetooth Button
on the OontZ Bluetooth Adapter for 5 seconds.
- The SPK 1 blue light will begin ashing and the OontZ Bluetooth Adapter is ready to connect to
dierent OontZ Speakers.
Page 13
Play Your Audio Wirelessly in Dual Stereo with Two OontZ Speakers
Place each speaker up to an unobstructed 66 feet
apart from the OontZ Bluetooth Adapter
*
Dual Stereo
for full stereo in separate areas
Full Stereo Full Stereo
* Placing the speakers on the ground or having walls or obstructions
between the OontZ Bluetooth Adapter and the speakers will signicantly
reduce the distance the two speakers can play away from the OontZ
Bluetooth Adapter
Page 14
Play Your Audio Wirelessly with Two Oontz Speakers
Left - Right stereo separation up to an unobstructed 66 feet
apart from the OontZ Bluetooth Adapter
*
* Placing the speakers on the ground or having walls or obstructions
between the OontZ Bluetooth Adapter and the speakers will signicantly
reduce the distance the two speakers can play away from the OontZ
Bluetooth Adapter
Left Channel - Right Channel
for stereo separation
Left Channel Right Channel
Page 15
Changing to Dual Stereo from Left Channel - Right Channel
Changing to Left Channel - Right Channel from Dual Stereo
Use Left Channel - Right Channel when placing the two speakers in the same area
to have stereo seperation.
- With the speakers connected together for Dual Stereo, Orange Light will be lit.
- To change to Left Channel - Right Channel, press the speaker mode button.
White Light will be lit and the Orange Light will turn o.
- SPK1
will say “Left Channel” and SPK2 will say “Right Channel” and you are ready to play.
– With the speakers connected together for Left Channel - Right Channel.
White Light will be lit.
–
To change to Dual Stereo, press the speaker mode button.
Orange Light will be lit and White Light will turn o.
–
Both speakers will say “Dual Stereo” and you are ready to play.
Use Dual Stereo when placing the two speakers in dierent areas, and both
speakers will play in full stereo.
Page 16
Troubleshooting
My adapter will not power on
– Please make sure the Micro USB Power Adapter is connected to the DC IN Power Connector and
into a power outlet. The SPK1 LED indicator should be ashing blue or a solid blue. Refer to
Page 6 for detailed instructions.
I am having trouble pairing and connecting to my Bluetooth device.
Please check the following:
– Your speaker(s) are Supported OontZ Speaker Models:
– OontZ Angle 3 RainDance
– OontZ Angle 3 ULTRA
– OontZ Angle 3XL ULTRA
For the latest list of Supported OontZ Speakers please visit TheOontZ.com/BT-Adapter
– The adapter and your speakers are within an unobstructed 10 feet / 3 meters from each other.
– The adapter is ready to connect to your OontZ Speaker(s); this is indicated by the SPK1 and SPK2
blue LED ashing alternately.
I hear an echo when connected to my TV
– Please make sure the internal speaker is turned o on your TV and only the audio to the
OontZ Bluetooth Adapter is enabled.
– The selection to turn o the internal speaker can usually be found in the TV on-screen
menu under audio settings. Please refer to your TV manual for more specic
instructions.
Page 17
Troubleshooting (continued)
After connecting the OontZ Bluetooth Adapter to my device, there is no audio
playing from my OontZ Speaker. Please check the following:
– Your device is connected to the adapter via the 3.5mm Audio Cable or Digital Audio Optical
Cable.
– Make sure the audio volume is at an audible level on both your speakers and device.
– Please make sure the settings for your device are enabled for the line-out/headphone out or the
Digital Audio out (depending on the cable you have connected to the OontZ Bluetooth Adapter).
– Some TVs require selecting the audio output setting to an external speaker in your TV on-screen
menus. The selection for the audio output setting can usually be found in the TV on-screen
menu under audio settings. Please refer to your TV manual for more specic instructions.
I hear a buzzing sound when connected to my TV.
– When using the Digital Audio Optical Cable connected to the OontZ Bluetooth Adapter make
sure the audio format setting for your TV is enabled for PCM out and not encoded audio such as
Dolby Digital.
– The selection to change the audio format on your TV can usually be found in the TV on-screen
menu under audio settings. Please refer to your TV manual for more specic instructions.
For the latest troubleshooting information please visit:
TheOontZ.com/troubleshooting and select the OontZ Bluetooth Adapter
Page 18
Reset Function
Step 1 : Turn the OontZ Bluetooth Adapter ON.
Step 2 : Press and hold down the Bluetooth Button for 5
seconds, then release.
Step 3 : The OontZ Bluetooth Adapter has now been reset.
Step 4 : Re-pair with OontZ speakers (Refer to Pair and
Connect instructions on Page 7 for connecting One
OontZ Speaker and Page 10 for connecting Two OontZ
Speakers)
Page 19
Checking OontZ Angle 3 ULTRA Firmware Version
OontZ Angle 3 ULTRA
OontZ Bluetooth Adapter requires your OontZ Angle 3 ULTRA to be updated to version 2.1.5 or
later. To check the rmware version on your speakers, perform the below steps for each speaker.
– Step A : Power on your OontZ Angle 3 ULTRA
– Step B : Insert the 3.5mm audio cable in the Aux In Jack of the speaker, you will hear the voice
prompt: “Aux In Source”.
– Step C : Press and hold the bluetooth button on the speaker for about 5 seconds until the red
light begins to ash. Release the bluetooth button .
- The red light will ash 2 times, the the orange light will ash 1 time, and then green light will
turn o and the blue light will ash 5 times. The green light will turn back on.
- This light sequence conrms the version 2.1.5 is on the OontZ Angle 3 ULTRA.
- If the light sequence conrms the rmware version is less than 2.1.5, the rmware needs to be
updated on the speaker.
- For detailed instructions on updating the rmware for your OontZ Angle 3 ULTRA visit
https://theoontz.com/pages/rmware. Select OontZ Angle 3 ULTRA on the page.
– When using two Supported OontZ Speakers, the rmware version needs to be the same on both
speakers. The same colored light on each speaker should ash the same number of times to
indicate the version of the rmware is the same on both speakers. If they are not the same the
rmware needs to be updated on one or both speakers.
Checking OontZ Angle 3XL ULTRA Firmware Version
OontZ Angle 3XL ULTRA
OontZ Bluetooth Adapter requires your OontZ Angle 3XL ULTRA to be updated to version 3.3.6 or
later. To check the rmware version on your speakers, perform the below steps for each speaker.
– Step A : Power on your OontZ Angle 3XL ULTRA
– Step B : Insert the 3.5mm audio cable in the Aux In Jack of the speaker, you will hear the voice
prompt: “Aux In Source”.
– Step C : Press and hold the bluetooth button on the speaker for about 5 seconds until the red
light begins to ash. Release the bluetooth button .
- The red light will ash 3 times, the green light will turn o and the blue light will ash 3 times
and then the white light will ash 6 times. The green light will turn back on.
- This light sequence conrms the version 3.3.6 is on the OontZ Angle 3XL ULTRA.
- If the light sequence conrms the rmware version is less than 3.3.6, the rmware needs to be
updated on the speaker.
- For detailed instructions on updating the rmware for your OontZ Angle 3XL ULTRA visit
https://theoontz.com/pages/rmware. Select OontZ Angle 3XL ULTRA on the page.
– When using two Supported OontZ Speakers, the rmware version needs to be the same on both
speakers. The same colored light on each speaker should ash the same number of times to
indicate the version of the rmware is the same on both speakers. If they are not the same the
rmware needs to be updated on one or both speakers.
Page 20
Page 21
OontZ Bluetooth Adapter - Other Important Notes
Speaker Power
- When the OontZ Speakers are playing from battery power and connected to the OontZ
Bluetooth Adapter, the speakers will remain on and will not automatically turn o after 30
minutes of not playing audio. This will use up the battery charge on the OontZ Speakers.
We recommend to:
1) Keep each OontZ Speaker plugged into a USB wall charger, which will keep each OontZ
Speaker charged and available.
They can remain on and available to play from the OontZ Bluetooth Adapter.
- Or -
2) Turn o each OontZ Speaker when you are done listening.
When the OontZ Bluetooth Adapter is on and the OontZ speakers are turned back. The OontZ
Bluetooth Adapter will automatically reconnect to each OontZ Speaker if they are within range.
Page 22
For online troubleshooting tips please visit:
TheOontZ.com/troubleshooting
and select the OontZ Bluetooth Adapter
Contact us at:
TheOontZ.com/support
and ll in our customer support form
If you have a question about your OontZ Bluetooth Adapter or experience an issue
with the adapter, our Customer Support Team wants to assist you.
Customer Support
Page 23
Safety and Precautions
When the OontZ Bluetooth Adapter is plugged in to a power source with the Micro USB Power
Adapter, never use near water, to prevent risk of electric shock.
Read and follow all instructions – All operating and use instructions should be followed.
Protect the Micro USB Power Adapter from being pinched, particularly at the connectors.
Unplug the Micro USB Power Adapter during lightning storms or when unused for long periods of
time.
Do not place adpater near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
Refer all servicing to qualied personnel. Servicing is required when the speaker has been
damaged in any way.
Do not make alterations to this adapter.
Use this adapter only with the supplied Micro USB Power Adapter which meets local regulatory
requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specications.
Do not place near naked ame sources, such as lighted candles, on or near the speaker.
Do not expose this adapter to excessive heat
(e.g. from storage in direct sunlight, re or the like)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Page 24
Safety and Precautions (continued)
Apple, iPhone, iPad, iPod, Mac are registered trademarks of Apple Inc.
Amazon, Alexa, Amazon Echo and Amazon Echo Dot are registered trademarks of Amazon.com, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc
UL is a registered trademark of UL.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
