Loading ...
Loading ...
Loading ...
12 49-3000373 Rev 0
Stain PreTreat
The Stain PreTreat feature allows you to indicate what stains are on the garments in your load. An initial water fill is
performed at a temperature tailored to the stain type selected and to an amount which enables a concentrated cleaning
step. A stain scrubbing period, followed by an active soak, is conducted to effectively treat the stain. Then additional water
is added to the selected temperature and the wash phase is conducted for the cycle selected. For washing normally soiled
cotton clothing the Stain PreTreat option should be in the Off position.
This feature can be applied to most wash cycles as described in the cycle guide.
To use Stain PreTreat:
1. Select the desired wash cycle.
2. Select the stain to be treated under the Stain PreTreat options.
Stain PreTreat Guide
Category
Recommended
Temperatures
Treatment/Wash
Stain
For best results,
before placing in washer:
Tomato Cool/Warm Sauce
Catsup
Salsa
Pretreat with liquid detergent or
stain remover product; rinse with
cool water.
Dirt Cool/Warm Dirt
Clay
Mud
Allow dirt to dry; remove loose
dirt using a brush. Rinse with cool
water.
Grass Cold/Warm Grass
Lipstick
Chocolate
Gravy
Mayonnaise
BBQ Sauce
Pretreat with liquid detergent or
stain remover product. Brush
lightly; rinse with cold water.
Wine Cool/Warm Wine
Soda
Kool-Aid
Tea
Coffee
Juice
Beer
Pretreat with mixture of Oxi product
and cool water. Add Oxi product
along with detergent in the washer.
• Recommended temperatures are optimal for stain removal performance; adjust temperature selection to suit load being washed.
• Ensure stain is completely removed after wash cycle and before placing in dryer; very tough stains may require a second treatment.
F
Cycle Options (on some models)
Settings
Select settings for agitation (Soil) and water temperature (Temp).
NOTE: Longer Spin times typically reduce dryer time/energy usage (i.e. reduces total energy when using both a washer and
a dryer).
Cold PLUS (on some models)
Select the Cold PLUS feature when looking to get a better clean in cold water while saving energy. Cold PLUS saves energy
by using less water heater energy for cold water vs. normal default settings. When selecting Cold PLUS there will be
additional agitation time to help improve cleaning performance vs. using cold water alone.
E
Getting started
USING THE WASHER
Wash Boost (on some models)
The Normal setting balances wash performance, fabric care, and cycle time for normally soiled or
lightly soiled loads.
Add Soak adds a series of soaks to reduce fabric wear and fading while still providing great wash
performance on garments and helping with stains.
Use Add Power for additional agitation and soaking to boost wash performance for loads needing a
deeper clean. This selection is ideal for heavier soiled items/loads.
Loading ...
Loading ...
Loading ...