Loading ...
Loading ...
Loading ...
414D/419D/424D
Users Manual
16
Clear
Push :
• 1x = Clear last value
• 2x = Clear all
• 2 seconds = Turn off Meter
Measurements with a Tripod
Measurements with the 419D and 424D that use a tripod
must have the tripod reference set. When set,
shows on
the display.
Reference Point
The display shows the reference point for a
measurement. The default reference point is from the end
of the Meter. If the beeper is on, the Meter beeps as you
change the reference point. See Figure 9 for more
information.
414D
Push 1x to change the reference point between the
front and the end of the Meter. The display shows
or .
419D/424D
The Meter automatically adjusts the reference point when
you use the endpiece and
shows on the display.
Push
:
• 1x = Measure from front
• 2x =
Measure from tripod screw
• 3x =
Measure from end
Note
T
he tripod mode overrides other reference
points. The Meter stays in the tripod mode until
you change to a different reference point.
1x
2x
Default
Auto-detect
9
gwo07.eps
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...