Loading ...
Loading ...
Loading ...
www.P yleUSA.com
9
Press the <OK> button to take photos. To switch back to
the video-recording mode, press the <MIC> button and
press and hold the <OK> button for ve minutes.
4. Collision Sensing
The DASHCAM is tted with a built-in collision sensor
(G-sensor). In case of severe vehicle collision, the
DASHCAM locks the image data generated at the time of
the accident, and displays a lock icon in the middle of the
screen. [Prompt] The collision sensor (G-sensor) supports
sensitivity adjustment. By default, sensitivity adjustment is
<O>. You can change the sensitivity settings as needed in
the setting menu.
5. Date and Time Setting
In standby state, press the <Menu> button twice to enter
the system setting menu. Press the <Down> button to
move the cursor to the <Set the date> option. Press the
<OK> button to conrm it, and enter the <Setting> menu.
[Prompt] Press the <Up> and <Down> buttons to select
values, press the <Menu> button to proceed to the next
option, and press the <OK> button to conrm the option
and then exit. [Note] To eectively record the date and
time of obtaining the evidence of the trac accident, set a
correct date and time before using the DASHCAM.
6. USB Mode
Connect the data recorder to the USB interface of a PC by
using a data cable. Then, the screen displays two modes:
memory and camera. Press the <Up> or <Down> button to
select the <Memory> option. Press the <OK> button to
enter the USB ash disk mode.
Loading ...