Loading ...
Loading ...
Loading ...
www.P yleUSA.com
8
6. Insert the charging interface of the in-vehicle charger into
the USB interface the data recorder.
7. Adjust the angle of the data recorder, ensuring that the
camera lens keeps level with the ground.
8. Start up the engine and check whether the DASHCAM is
mounted properly.
II. Function Description
1. Automatic Recording
After you start up the automobile engine, the DASHCAM
will automatically start and recording function will be
enabled. In addition, the system indicator and power
indicator are turned on, and the REC indicator on the screen
blinks. After you turn o the automobile engine, the
DASHCAM saves the recorded content automatically and
will be powered o. The recorded images are saved
segment by segment in the Memory card. When the
Memory card saved images is at full capacity, the data
recorder overwrites the early recorded images.
NOTE: You can set the time period of recording in the menu.
The time period can be set to 1 minute, 3 minutes, and 5
minutes. The default time period is 3 minutes.
2. Manual Recording
Press the <Power> button, the DASHCAM is powered on
and begins to record data automatically. Press and hold the
<Power> button for 5 seconds, and then the DASHCAM
saves the recording data automatically and is powered o.
3. Photography Function
In standby state, press the <MIC> button to enter the
photography mode. Then, the icon in the upper left of the
screen is changed from a video camera to a still camera.
Loading ...
Loading ...