Loading ...
Loading ...
Loading ...
AA
Keep parallel
to door edge.
TEMPLATE
NOTE: Double check your product for the correct hole sizes.
The latch bolt should be
in retracted position.
Slide the cable through the
notch in mounting plate.
BB
Hardware Used (Actual Size)
Note : The metal connector
side should face outward.
Connect the cable firmly
into connector port.
The cable must be arranged
as shown in the diagram.
Insert the torque blade into the
interior slot of the thumbturn.
Insert screws and tighten. Install batteries
CORRECT
WRONG
Keep the thumbturn in
vertical position.
CC
Hardware Used (Actual Size)
CC
Hardware Used (Actual Size)
CC
I
H
CC
Tap latch flush
AA
AA
AA
AA
CAUTION :
Please use four alkaline batteries for better performance. Be sure to insert them correctly by
matching the + and – polarity markings. Do not mix old batteries and new batteries or standard
(carbon-zinc) with alkaline batteries.
Step 3: Install Electronic Deadbolt
Step 5:
Program Lock
Indicator State
Red Light
Yellow Light
Green Light
Green Light Flashes 2 Times with 2 Beeps
Green Light Flashes with 1 Beep
Red Light Flashes 3 Times with 3 Beeps
Meaning
Wrong PIN code was entered.
The batteries are in low power.
Correct PIN code was entered.
Lock has been removed from the Hubspace app.
Lock/Unlock successfully.
Lock/Unlock unsuccessfully.
NOTE:
If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the
instructions.
Install the latch
Install strike plate in door jamb
Insert screws and tighten.
Edge of door
Tap Smart Plug from the homepage in Hubspace app, and find “Wi-Fi gateway support to another
device” to setyour Smart Plug as a Wi-Fi Gateway. This allows you to connect your lock remotely with
internet access from your phone.
08
10 11
06
07
OR
You must use the latch that was provided in the packaging.
Edge of door
Rotate torque blade to fit in latch.
Cable goes underneath latch.
Fasten the mounting plate to door
Connect the cable firmly into connector port
Install interior assembly
Installing the lock assemblies
Download the Hubspace app from the App Store or the Google Play Store.
Tap “+” button in the upper right corner to add your plug by scanning QR code on plug or in Smart Plug
Quick Start Guide
Set up Smart Plug as Wi-Fi Gateway for remote control.
Set up your Voice Assistant
Create an account, or if you already have an account, sign in.
Tap “+” button in the upper right corner to add your lock by scanning QR code on the lockset or in Lock Quick
Start Guide, and it will perform lock direction check automatically
Connect your plug to power and follow the instructions on the Hubspace app screen.
AA
Hardware Used (Actual Size)
Wood block (not included)
NOTE:
Check the strike plate to make sure it is
properly aligned and clear so the bolt can freely
move in the hole.
1-3/4”
(45 mm)
1-3/8”
(35 mm)
1-9/16”
(40 mm)
2”
(51 mm)
Ø 2-1/8” (54 mm)
Ø 1-1/2” (38 mm)
Drill a 1” (25 mm) diameter
hole at the center of the door
edge.
Fold here.
Place on the door edge.
2-3/4” (70 mm)
2-3/8” (60 mm)
Backset
Backset
Drive-in latch
The bulged part of the mounting
plate must face towards the door.
BB
Do NOT leave the key in
the cylinder during
installation.
AA
AA
AA
AA
NOTE:
1. The range of the Bluetooth® connection is approximately 30 feet (10
meters). However, maximum communication range will vary depending on
obstacles (person, metal, wall, etc.). For best connectivity, we recommend
plugging Smart Plug in a power outlet near your lock.
2. The device only connects to 2.4GHz networks and does NOT support 5GHz
bandwidth. Hubspace only shows Wi-Fi networks that your device can use.
3. If you do not see your Wi-Fi network name when you attempt to connect
your devices, please check your router settings or move your product closer
to your Wi-Fi router.
You can connect your smart plug to Google Home and Alexa from the Hubspace app. Or, you can sign in to Alexa
app or Google Home and connect to your Hubspace devices from there.
Lock
Indicator
Insert the Smart Plug
into a wall socket.
You can now plug in the
desired electrical appliance.
Insert the plug into the
socket. The plug is now
ready to use.
Do not insert plugs in a row.
Step 4:
Smart Plug
Follow the instructions on the Hubspace app screen.
NOTE:
If the QR code is missing or
unable to scan, follow the
app instructions. Press and
hold the SET button for 5
seconds to discover your
lock.
AA
AA
AA
AA
09
Input
Output
Network Wireless Type
Operating Temperature
Operating Humidity
Certification
120VAC, 60Hz
120VAC, 60Hz,10A Maximum
load, Resistive
2.4GHz, IEEE 802.11b/g/n
32°–104° F
5-85% RH, Non-condensing
FCC, IC, ETL
Part
a
b
c
Description
Power Socket
Indicator Light
Power Button
LED State
Plug State Meaning Action To Take
Off
On
Off
Off
No action required.
Green
On
Red Off
Orange On
Orange/Green Quick Blink
Go to the device settings in the app and set up Wi-Fi again. Check that your
WiFi Access Point is allowing the device to join the network.
Set up Wi-Fi for the product. If you have already set up Wi-Fi for this product,
wait for it to connect. Check the Hubspace app for connectivity status.
Smart Plug
Orange Quick Blink
b
c
a
Wi-Fi is not connected.
The plug is off.
The plug is on.
There is a Wi-Fi error.
Hubspace app
Remote Control
Wi-Fi Router
Wi-Fi Gateway Setup
Loading ...
Loading ...
Loading ...