Loading ...
Loading ...
Loading ...
9
4580 N. Walnut Rd., N. Las Vegas, NV 89081
|
13592 Desmond St., Pacoima, CA 91331
|
tel: 818.897.0808
|
888.753.9898
|
www.AmericanRangeHome.com
INSTALLATION
A
8" MIN.
24" MIN TO
NON-COMBUSTIBLE MA
TERIAL
30" MIN TO
COMBUSTIBLE MATERIAL
A
18" MIN.
13" MAX
36"
CABINET DEPTH
Range Width “A” Dimension Electrical Supply
29-7/8" (759mm) 30" (762 mm) 30 AMP
35-7/8" (911mm) 36" (914 mm) 50 AMP
47-7/8" (1216 mm) 48" (1219 mm) 60 AMP
59-7/8" (1521 mm) 60" (1524 mm) 60 AMP
CLEARANCE DIMENSIONS
ELECTRICAL & GAS
SUPPLY LOCATION
E
G
MIN
3-1/2"
CLEAR SPACE FOR
GAS SUPPLY CONDUIT AND
POWER SUPPLY CORD
CHECK LOCAL CODES FOR MINIMUM
HEIGHT LOCATION OF ELECTRICAL
RECEPTACLE TO FLOOR
66" min.
TO
72" max.
30" min.
TO
36" max.
24"
6"
30"
66" min.
TO
72" max.
30" min.
TO
36" max.
30" min.
TO
24"
CLEARANCE DIMENSIONS
INSTALLATION INSTRUCTIONS
The installation of the appliance must be performed by a qualied, certied, and
licensed installer.
» Products are anchored to the wooden shipping pallet using metal straps that are
screwed to the bottom of the product and the pallet.
» To remove the packaging, rst remove the staples located at the bottom
perimeter of the corrugated cover.
» Remove the corrugated cover by lifting it o the product and remove the inner packing.
» Detach the product from the metal anchor strip by removing the attachment screw.
» Conrm available access to adequate power and gas. (See Specications, Gas and Electrical Requirements table.)
» Fill out the front page and installation checklist of this installation manual with requested data. Model number and serial number
can be found on the nameplate located underneath the control panel on the front of the appliance.
Use protective gloves
and safety glasses.
Keep any packaging materials away from children.
Ask for assistance when lifting heavy objects.
Dispose of all packaging materials properly.
!
WARNING
Island InstallWall Install
Loading ...
Loading ...
Loading ...