1. Home
  2. Mitsubishi
  3. Mitsubishi MSZAP60VGD2KIT User Manual
  4. Page 7

Mitsubishi MSZAP60VGD2KIT Electric 6.0Kw DRED Enabled Split System Air Conditioner

User Manual - Page 7

For MSZAP60VGD2KIT.

PDF File Manual, 21 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
En-6
AUTO mode (Auto change over)
Theunitselectstheoperationmodeaccordingtothedifferencebetweenthe
roomtemperature and thesettemperature. DuringAUTOmode, theunit
changesmode(COOL↔HEAT)whentheroomtemperatureisabout2°C
awayfromthesettemperatureformorethan15minutes.
Note:
AutoModeisnotrecommendedifthisindoorunitisconnectedtoaMXZ
typeoutdoorunit.Whenseveralindoorunitsareoperatedsimultaneously,
theunit maynotbe ableto switchoperationmode betweenCOOLand
HEAT.Inthiscase,theindoorunitbecomesstandbymode(Refertotable
ofOperationindicatorlamp).
COOL mode
Enjoycoolairatyourdesiredtemperature.
Note:
DonotoperateCOOLmodeatverylowoutsidetemperatures(lessthan
-10°C).Watercondensedintheunitmaydripandwetordamagefurni-
ture,etc.
Note:
Multi syst em operation
Twoormoreindoorunitscanbeoperatedbyoneoutdoorunit.Whenseveral
indoor units are operated simultaneously, cooling/dry/fan and heating opera-
tionscannotbedoneatthesametime.WhenCOOL/DRY/FANisselectedwith
oneunitandHEATwithanotherorviceversa,theunitselectedlastgoesinto
standbymode.
Operation indic ator lamp
Theoperationindicatorlampshowstheoperationstateoftheunit.
Indication Operationstate Roomtemperature
Theunitisoperatingtoreachtheset
temperature
About2°Cor more
awayfromsettem-
perature
Theroomtemperatureisapproach-
ingthesettemperature
About1to2°Cfrom
settemperature
DemandResponsemodePage12 —
Lit Blinking Notlit
1
Press
tostarttheoperation.
2
Press toselectoperationmode.Eachpress
changesmodeinthefollowingorder:
3
Press or tosetthetemperature.
Eachpressraisesorlowersthetemperatureby1°C.
Press tostoptheoperation.
S
ELECTING OPERATION MODES
(AUTO) (COOL) (DRY) (HEAT) (FAN)
DRY mode
Dehumidifyyourroom.Theroommaybecooledslightly.
TemperaturecannotbesetduringDRYmode.
HEAT mode
Enjoywarmairatyourdesiredtemperature.
FAN mode
Circulatetheairinyourroom.
Note:
After COOL/DRY mode operation, it is recommended to operate in the
FANmodetodryinsidetheindoorunit.
Loading ...
Loading ...
Loading ...