Loading ...
Loading ...
Loading ...
d. To prevent wireless interferences, place both units at least 3 feet away from
electronic devices (EX: TV, computer, microwave etc.)
Outdoor Sensor Function:
a. Once the display unit has been set up and the channel synchronized with the
outdoor sensor, the display unit will begin the registration process. It can take up to
3 minutes to complete the registration, where the display unit will search for an RF
(Radio Frequency) signal from the outdoor sensor. The outdoor sensor signal
strength will show the connection strength to the outdoor sensor. If there are no
bars or if bars are not showing at its maximum strength (5 bars) try placing the
outdoor sensor or display unit elsewhere for better connection.
b. If the RF Signal was lost and not reconnected, the outdoor temperature and
humidity level will begin to flash after 1 hour of lost connection. If no connection was
found after 2 hours only a dotted line ‘ - - - ’ will be displayed in place of the
temperature and humidity level.
c.
To manually restar
t t
he RF registration, press and hold the “
CH
” bu
tto
n for 3
seconds. The display unit will now search for the RF signal for
the next 3 minutes.
Week Display:
TROUBLESHOOTING:
Problem
Possible Solution
Outdoor Reading Is Flashing or
Showing Dashes
Flashing of the outdoor reading is generally an indication of wireless
interference. This weather station is arranged to communicate with three
external sensors.
Loading ...
Loading ...