Loading ...
Loading ...
Loading ...
4
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Module/FCC ID ........................... 5123A-11/QOQ11
Weight ..........................................................2.8 lbs
(Tool-Only)
Weight ..........................................................6.3 lbs
(With heaviest compatible battery pack)
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
Cat. No. ..................................................... 3060-20
Anvil Type .................................... 3/8" Friction Ring
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
Cat. No. ..................................................... 3061-20
Anvil Type .................................... 1/2" Friction Ring
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
Cat. No. ................................................... 3061P-20
Anvil Type ....................................... 1/2" Detent Pin
RPM ............................................................. 0-2325
IPM .............................................................. 0-3500
FUNCTIONAL DESCRIPTION
1. 1/2" Detent pin anvil
(3061P-20)
2. LED
3. LED performance
indicator
4. Control switch
5. Handle
6. Belt clip
7. Speed control
indicator
1
2
5
6
4
9
Cat. No. 3061P-20
10
11
3
7
8
8. Drive control button
9. Trigger
10. 1/2" Friction ring anvil
(3061-20)
11. 3/8" Friction ring anvil
(3060-20)
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove the battery pack
any time the tool is not in use.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Use only sockets and other acces-
sories specifically designed for
use on impact wrenches and drivers. Other
sockets and accessories might shatter or break
causing injury.
Attaching and Removing Accessories
Square Drive Impact Wrenches
(Cat. No. 3060-20, 3061-20)
1. WARNING! Remove battery to avoid starting the tool.
2. Use only the appropriate size square drive sockets.
3. To attach a socket, align the accessory with the
anvil and push it rmly over the retaining ring.
4. To remove the accessory, pull the accessory o
the anvil.
Square Drive Impact Wrench with Pin Detent
(Cat. No. 3061P-20)
1. WARNING! Remove battery to avoid starting the tool.
2. Use only the appropriate size square drive sockets.
3. To attach a socket, align the hole in the accessory
with the detent pin on the anvil. Hold the detent
pin in while pushing the socket onto the anvil.
The detent pin will snap into place in the hole to
secure the socket.
4. To remove the socket, insert a nail or other thin
object into the hole in the accessory and press
in the detent pin. Pull the accessory o the anvil.
ONE-KEY™
To learn more about the ONE-KEY™ functionality
for this tool, go to milwaukeetool.com/One-Key. To
download the ONE-KEY™ app, visit the App Store
®
or Google Play™ from your smart device.
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready
to be congured via the ONE-KEY™
app.
Blinking Blue Tool is actively communicating with
the ONE-KEY™ app.
Blinking Red Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
Loading ...
Loading ...
Loading ...