Hikvision DS-KB8113-IME1B User Manual

Loading ...

Press Buon to Call

Steps

Click Intercom → Press Buon to Call to enter the seng page.

Check Call Management Centeror Call Specied Indoor Staon to set the buon.

Note

If you check Call Specied Indoor Staon, you should enter the specied indoor staon No.

ClickBacklight Mode and you can select a backlight mode from the drop-down list.

I/O Sengs

Steps

Click Intercom → I/O Sengs to enter the I/O input and output sengs page.

Select I/O input No., input mode, output No., and output mode.

Click Save to enable the sengs.

Note

●

For door staon, there are 4 I/O input terminals. By default, Terminal 1 and 2 correspond to

Door Status. Terminal 3 and 4 correspond to interfaces of Door Switch.

●

For door staon, there are 2 I/O Output Terminals. Terminal 1 and 2 correspond to Door

interfaces (NO1/COM/NC1; NO2/COM/NC2) of door staon. Door 1 is enabled by default. You

can enable/disable IO Out according to needs.

Number Sengs

Link the room No. and SIP numbers.

Click Intercom → Number Sengs to enter the page.

DS-KB8113-IME1(B) Series Vandal-Resistant Door Staon User Manual

Loading ...

Hikvision DS-KB8113-IME1B Vandal-Resistant Doorbell