Loading ...
Loading ...
Loading ...
PREPARING THE VANITY CABINET FOR
INSTALLATION OF THE COUNTERTOP
AND SINK
IMPORTANT: Make sure all surfaces are clean.
8. Apply an adhesive around the top edge of the vanity
cabinet. Add an extra dot on all
4 corners of the
vanity top.
10. Once positioned, press rmly into place. Wipe away any
excess sealant using a damp cloth.
12. Once assembled allow the silicone sealant to fully dry
according to the manufacturer’s recommendation. When
dry, proceed to the installation of your faucet and drain.
13. For stone tops, such as marble and granite, it is
recommended that you apply a high quality sealer to
protect from staining and discoloration. Stone sealer
should be reapplied once or twice per year, depending
upon usage, according to sealer’s instructions.
11. If you are installing a wood back-splash (available on
specic models), place a generous amount of silicone
sealant on the back of it and press it into place against
your bathroom wall. Fill any gaps that are left with silicone
sealant. Wipe away any excess sealant with a damp cloth.
IMPORTANT
• Ensure the vanity cabinet is in place and has been properly
installed to meet plumbing codes. For your safety and to
achieve the best possible results, James Martin Vanities
recommends you consult with a professional contractor.
• Shut off the water supply. Water supply and drain access
must be in place prior to installing the countertop and sink.
• Ensure the vanity cabinet is level.
9. With assistance from another person, carefully lift the
countertop with sink to a vertical position and ease onto
the vanity cabinet, front edge rst.
Important: The countertop is very fragile. Take caution when
handling, and have someone assist you.
Installation Instructions for 3cm Countertops with Undermount Sink
4
12/23
JAMES MARTIN VANITIES