Loading ...
Loading ...
SINK INSTALLATION
IMPORTANT: Make sure all surfaces are clean.
Place top nished side down on a soft surface.
1. Using a tape measure, draw a straight 3” line marking the
center points of all sides of the sink cut out.
2. Carefully unpack the undermount sink and place on a
soft surface, bowl side up. Using a tape measure, identify
and mark center point on all sides of the bottom and
prole of the lip of the sink.
3. Carefully lift the sink and place it centered over the
countertop cutout, bowl side up and with the overow
drain at the opposite end from the faucet holes. Align all
marked center points along each side of the lip of the
sink, with the marked center points along cut out in the
countertop. Ensure the sink is centered over the opening
and carefully trace around the perimeter of the sink
with a marker.
4. Carefully lift the sink from the countertop and place it on
a soft surface, bowl side down. Apply a bead of silicone
sealant around the top edge of the sink rim.
5. Carefully lift and turn the sink over on the countertop,
positioning it within your marked outline, ensuring again
that the overow is opposite from the faucet holes.
Once positioned, press rmly in place.
6. Wipe away any excess sealant.
To ensure proper adhesion,
and for added stability, apply
the sink clips before allowing
the sealant to dry.
OVERFLOW
OVERFLOW
OVERFLOW
7. Attach sink clips by placing the contoured end of the
bracket against the sink lip, aligning the open, notched
area over the threaded inserts. The bracket will be at a
slight angle, and the angle will vary depending on the
thickness of the sink lip. Insert the set screw. Allow sealant
to dry as indicated by manufacturer. Although the sealant
is what secures the sink to the top, we suggest keeping
the clips in place after installation.
3
Installation Instructions for 3cm Countertops with Undermount Sink
JAMES MARTIN VANITIES
Loading ...