Installation Method
Steps
Desktop Installation
Wall-Mounted
Installation
Place the device on the desk.
1. Check the distance between the two hanging
holes on the rear panel of the device.
2. Insert two M4 screws into the wall.
3. Align the hanging holes with the screws, and
hang the device on the screws.
Provides additional information to emphasize or supplement
important points of the maintext.
Indicates a hazard with a high level of risk, which if not avoided,
will result in death or serious injury.
Symbol
Applicable Models
This manual is applicable to 5-Port 100 Mbps Ethernet Switch.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Description
• During the installation and utilization of the device, please strictly conform to electrical
safety rules in different nations and regions.
• This is a class A product and may cause radio interference in which case the user may be
required to take adequate measures.
• Ensure to use the attached power adaptor only and not to change the adaptor randomly.
Please refer to specification table for specific requirements of power adaptor.
• If the product does not work properly, please contact your dealer or the nearest service
center.
• Never attempt to disassemble the device yourself. (We shall not assumeany responsibility
for problems caused by unauthorized repair or maintenance.)
• The device must be installed in machine room only, and only maintenance staff or
qualified person should access thedevice.
• Do not touch the upper cover area of the device that may be overheated.
• Power must be shut down during cable connection, device installation and
dismantlement.
• You shall acknowledge that the use of the device with Internet access might be under
network security risks, please strengthen protection for your personal information and
data security.If youfind the device mightbe undernetwork security risks, please contact
us.
• Proper configuration of all passwords and other security settings is the responsibility of
the installer, and you shall keep user name and passwords properly.
• Please keep all original packing materials properly. If the product does not work
properly, pack the switch in its original packing materials for shipping. We shall
not assume any responsibility for damages caused by improper packing materials
during shipping.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
2
3
Appearance
Packing List
Switch × 1
Power Adapter × 1
•Quick Start Guide × 1
•Multilingual Information
of Network Switch × 1
Indicator/Port
No.
Description
①
②
③
100 Mbps RJ45 Port
LINK/ACT Indicator
PWR Indicator
Power Supply
Used for connection to another device via
a network cable.
④
Indicates the statuses of 100 Mbps RJ45
ports 1 to 5.
Use the attached power adapter to
connect the switch to a socket.
Indicates the power status of the switch.
4
•Prepare screws yourself.
•Ensure that the distance between the two screws equals to the distance
between the two hanging holes.
•Set aside at least 4 mm of the screw bodies outside the wall.
Device Installation
Please select the appropriate installation method according to the actual
needs.
①
②
③
④
1
©2023 Hangzhou Hikvision Digital Technology Co.,Ltd. All rights reserved.
About this Manual
• The Manual includes instructions for using and managing the Product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of this Manual at
the Hikvision website (https://www.hikvision.com/).
• Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Trademarks
• and other Hikvision’s trademarks and logos arethe properties of Hikvision in
various jurisdictions.
• Other trademarks and logos mentioned arethe properties of their respective owners.
Disclaimer
• TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED,WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED
“AS IS”AND “WITH ALL FAULTS AND ERRORS”. HIKVISIONMAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISIONBE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,WHETHER BASED ON BREACH OF
CONTRACT,TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISIONHAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
• YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
• YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
• IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,THE
LATTER PREVAILS.
5-Port 100 Mbps Ethernet Switch
Quick Start Guide
Loading ...
