FLUKE 87V/IMSK User Manual for the Fluke 87V/IMSK Industrial Multimeter Service Combo Kit with current clamp, 1000 V, 10 A

Loading ...

80 Series V

Users Manual

3. If you are using the A terminal, set the rotary switch to

mA/A. If you are using the mA/µA terminal, set the

rotary switch to µA for currents below 6000 µA

(6 mA), or mA/A for currents above 6000 µA.

4. To measure dc current, press

5. Break the circuit path to be tested. Touch the black

probe to the more negative side of the break; touch

the red probe to the more positive side of the break.

Reversing the leads will produce a negative reading,

but will not damage the Meter.

6. Turn on power to the circuit; then read the display. Be

sure to note the unit given at the right side of the

display (µA, mA, or A).

7. Turn off power to the circuit and discharge all high-

voltage capacitors. Remove the Meter and restore the

circuit to normal operation.

The following are some tips for measuring current:

• If the current reading is 0 and you are sure the Meter

is set up correctly, test the Meter's fuses as described

under "Testing the Fuses".

• A current Meter drops a small voltage across itself,

which might affect circuit operation. You can calculate

this burden voltage using the values listed in the

specifications in Table 14.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 87V/IMSK Industrial Multimeter Service Combo Kit with current clamp, 1000 V, 10 A