Loading ...
Loading ...
Loading ...
NOTICE
Page 27
Turning o the water supply to your pump with the engine running will damage the pump.
Damage caused by running the pump without water is not covered under warranty. To
avoid this hazard always turn o the engine before shutting o the water supply.
PUMP DAMAGE
SHUTTING OFF THE ENGINE
2. Slide the throttle to the SLOW position (if equipped).
3. Turn the engine switch or key to the OFF position.
4. Slide the fuel valve to the OFF position.
5. Turn o the water supply.
7. Allow the engine to cool completely before handling and storage.
1. Set the trigger lock on the spray gun.
6. Release the trigger lock then squeeze the spray gun trigger to relieve the pressure
in the hose and pump.
4. Pull the choke out for starting a COLD engine.
Push in for a warm engine.
5. Turn the key past the ON position to the START
position. Allow the engine to start. If the engine does
not start after 5 seconds. Release the key and allow
the starter to cool for one minute.
6. Once the engine has started, allow the key to
return to the ON position.
7. Slowly push the choke lever in as the engine
warms. If the engine falters, pull the choke out until
the engine has warmed up.
3. Slide the throttle to the RUN position (if equipped).
ON
START
8. Allow engine to warm for 1-2 minutes before using the product.
Loading ...
Loading ...
Loading ...